Real Fortinet FCP_FWF_AD-7.4 Exam Questions [Updated 2025]
FCP_FWF_AD-7.4 Exam Dumps Pass with Updated 2025 FCP - Secure Wireless LAN 7.4 Administrator
NEW QUESTION # 58
When configuring bridge mode on FortiAP devices, which options should be considered?
(Select all that apply)
Response:
- A. Configuring traffic flow between wired and wireless networks
- B. Enabling load balancing
- C. Setting up VLANs for traffic segmentation
- D. Disabling SSID broadcast
Answer: A,C
NEW QUESTION # 59
VLAN load-balancing features are designed to:
Response:
- A. Enhance wireless signal strength.
- B. Secure wireless traffic using encryption.
- C. Create guest accounts for the network.
- D. Distribute traffic across multiple VLANs efficiently.
Answer: D
NEW QUESTION # 60
How are wireless clients assigned to a dynamic VLAN configured for hash mode?
Response:
- A. Using the current number of wireless clients connected to the SSID and the number of clients allocated to each of the VLANs
- B. Using the alphabetical order of the client device names and the VLAN names.
- C. Using the current number of wireless clients connected to the SSID and the number of IPs available in the least busy VLAN
- D. Using the current number of wireless clients connected to the SSID and the number of VLANs available in the pool
Answer: D
NEW QUESTION # 61
To ensure that traffic from different wireless clients is efficiently balanced among several access points in a high-density environment, you would primarily:
Response:
- A. Configure FortiAP and client load balancing.
- B. Use the FortiGate guest management feature.
- C. Configure VLANs on each SSID.
- D. Enable advanced bridge mode.
Answer: A
NEW QUESTION # 62
What insights can packet captures provide?
Response:
- A. RF interference levels
- B. Possible issues in the handshake process
- C. The quality of the connection between client and AP
- D. The type of encryption being
Answer: B,C,D
NEW QUESTION # 63
What are the benefits of using FortiPresence analytics in a wireless network?
(Select all that apply)
Response:
- A. Enhancing wireless signal strength
- B. Gaining insights into user behavior and footfall patterns
- C. Providing real-time data for decision-making
- D. Monitoring and suppressing rogue APs
Answer: B,C
NEW QUESTION # 64
VLAN load-balancing features mainly aim to:
Response:
- A. Strengthen wireless signals.
- B. Configure advanced bridge modes.
- C. Evenly distribute network traffic across VLANs.
- D. Set up guest accounts for visitors.
Answer: C
NEW QUESTION # 65
Which configurations should be applied to enhance wireless security on FortiGate?
(Select all that apply)
Response:
- A. Configure WPA3 encryption for SSIDs
- B. Implement VLAN load-balancing
- C. Hide SSIDs to reduce visibility
- D. Enable WIDS profiles for rogue AP detection
Answer: A,C,D
NEW QUESTION # 66
Which pieces of information are considered important when gathering wireless network details?
Response:
- A. SSID broadcast frequency
- B. Client device's screen size
- C. AP's MAC address and IP
- D. Encryption type used
Answer: A,C,D
NEW QUESTION # 67
Refer to the exhibit.
Why is Radio 3 used for the spectrum analysis? Response:
- A. The 5 GHz frequency band is available only on Radio 3.
- B. Only Radio 3 is compatible with the selected band.
- C. Radio 1 and Radio 2 are unavailable to run the spectrum analysis.
- D. Radio 3 is the configured dedicated monitoring radio for this FortiAP model.
Answer: D
NEW QUESTION # 68
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit C
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices. Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs. To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance? Response:
- A. Enable frequency handoff on the AP to band steer clients
- B. Increase the transmission power of the AP radios
- C. Reduce the number of wireless networks being broadcast by the AP
- D. Install another AP in the reception area to improve available bandwidth
Answer: A
NEW QUESTION # 69
In a packet capture, what might a series of "ACK" packets indicate?
Response:
- A. A client device's failed authentication attempt
- B. The presence of rogue APs
- C. DHCP server's malfunction
- D. Successful data transmission and receipt acknowledgment
Answer: D
NEW QUESTION # 70
What protection does WPA3 wireless encryption provide over WPA2 for securing wireless networks?
- A. WPA3 addresses the KRACK vulnerability
- B. WPA3 prevents legacy and deprecated wireless protocols from being used
- C. WPA3 uses 128-bit session key size
- D. WPA3 enforces only enterprise security mode
Answer: A
NEW QUESTION # 71
Which command is used to configure VLANs on an SSID using the FortiGate CLI?
Response:
- A. config interface vlan
- B. config wireless-controller vap
- C. config wlan ssid
- D. config wireless-controller vlan
Answer: B
NEW QUESTION # 72
As a network administrator, you are responsible for managing an enterprise secure wireless LAN. The controller is based in the United States, and you have been asked to deploy a number of managed APs in a remote office in Germany.
What is the correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs?
Response:
- A. Configure the APs individually by overriding the settings in Managed FortiAPs
- B. Clone a suitable FortiAP profile and change the county code settings on the profile
- C. Configure the controller for the correct country code for Germany
- D. Create a new FortiAP profile and change the county code settings on the profile
Answer: B
NEW QUESTION # 73
What two pieces of information are sent by the wireless controller to FortiPresence about connected smartphones?
(Choose two.)
Response:
- A. Cellular provider
- B. MAC address
- C. Battery level
- D. Signal strength
Answer: B,D
NEW QUESTION # 74
Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?
Response:
- A. Wireless network security must be set to open
- B. Two wireless APs must be sending data
- C. DTLS encryption on wireless traffic must be turned off
- D. SQL services must be running
Answer: D
NEW QUESTION # 75
What can result if two APs have overlapping frequencies?
Response:
- A. Faster client device authentication
- B. Enhanced signal strength
- C. RF interference
- D. Extended DHCP lease time
Answer: C
NEW QUESTION # 76
WPA3 encryption is optional when configuring a secure wireless network on FortiGate.
Response:
- A. False
- B. True
Answer: A
NEW QUESTION # 77
Which measure is the best indication of a wireless client's connection quality?
Response:
- A. Client signal strength
- B. Client link rates
- C. AP association count
- D. Channel utilization
Answer: B
NEW QUESTION # 78
Which two statements about distributed automatic radio resource provisioning (DARRP) are correct?
(Choose two.)
Response:
- A. DARRP measurements can be scheduled to occur at specific times.
- B. DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.
- C. DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.
- D. DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.
Answer: A,C
NEW QUESTION # 79
To achieve centralized management of multiple FortiAP devices, one would most likely use:
Response:
- A. Directly via each FortiAP's web interface
- B. FortiPresence analytics
- C. FortiGate integrated wireless controller
- D. FortiPlanner
Answer: C
NEW QUESTION # 80
Which of the following tools are associated with predictive modeling or analytics?
Response:
- A. FortiAP Cloud
- B. FortiPresence
- C. FortiGate
- D. FortiPlanner
Answer: B,D
NEW QUESTION # 81
Which of the following are considered wireless security options?
Response:
- A. Firmware updating
- B. SSID hiding
- C. WPA3 encryption
- D. Rogue AP scanning
Answer: B,C,D
NEW QUESTION # 82
......
FCP_FWF_AD-7.4 Exam Dumps, FCP_FWF_AD-7.4 Practice Test Questions: https://www.prep4sures.top/FCP_FWF_AD-7.4-exam-dumps-torrent.html
Free FCP_FWF_AD-7.4 Exam Dumps to Pass Exam Easily: https://drive.google.com/open?id=1JQagJ_XC0SksX3VNRNcD7Fh8sf0sRJ2V