107 Exam Questions for HPE6-A72 Updated Versions With Test Engine
Pass HPE6-A72 Exam with Updated HPE6-A72 Exam Dumps PDF 2024
NEW QUESTION # 38
Match each description to the correct management tool tor AOS-CX.
Answer:
Explanation:
Explanation:
A screenshot of a computer Description automatically generated
NEW QUESTION # 39
Click on the colored box that corresponds with the line that best represents Broadcast traffic flow.
Answer:
Explanation:
NEW QUESTION # 40
Which two statements accurately describe the features of NetEdit? (Choose two.)
- A. NetEdit can run on a mobile device using Android or Apple IOS.
- B. NetEdit can be used to configure and validate any third-party device that supports SSH and REST access.
- C. NetEdit supports viewing and editing multiple devices using a single deployment plan.
- D. NetEdit can perform configuration and compliance validation.
- E. NetEdit includes trial licensing for up to 10 nodes.
Answer: C,D
NEW QUESTION # 41
Which Ethernet port combination does the Aruba 5400R ZL2 switch series support?
- A. 10/100 Megabit Ethernet, Gigabit Ethernet, and 40 Gigabit Ethernet
- B. 10/100 Megabit Ethernet, Gigabit Ethernet, and 100 Gigabit Ethernet
- C. 10/100 Megabit Ethernet, Gigabit Ethernet, 25 Gigabit Ethernet, and 100 Gigabit Ethernet
- D. Gigabit Ethernet, 25 Gigabit Ethernet, and 40 Gigabit Ethernet
Answer: A
NEW QUESTION # 42
Which command can be used to find the serial number of an Aruba OS-CX switch?
- A. The command inventory
- B. The command show system
- C. The command show running-configuration
- D. The command version
Answer: B
Explanation:
Explanation/Reference:
NEW QUESTION # 43
Refer to the exhibit.
You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.
What is a valid configuration for Access-2 to join the VSF stack?
- A. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - B. Access-2# configure
Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit Access-2(config)# vsf renumber-to 2 This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - C. Access-2# configure
Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2
2/1/28 Access-2(vsf-member-1)# exit
This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - D. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
Answer: D
NEW QUESTION # 44
What is the login and password combination is used when first configuring an Aruba OS-CX switch from factory defaults?
- A. Loginadminand password admin.
- B. Loginadminand password forgetme!
- C. Loginadminand password field empty.
- D. Login admin and password password.
Answer: C
NEW QUESTION # 45
Refer to the exhibit.
The Aruba 8400 in the exhibit is member 2 of a VSX stack.
Which command will enter the interface sub configuration mode for the port, indicated by the orange square?
- A. 8400(config)# interface 2/4/15
- B. 8400(config)# interface 1/7/16
- C. 8400(config)# interface 1/4/15
- D. 8400(config)# interface 2/3/17
Answer: A
NEW QUESTION # 46
Refer to the exhibit.
The above scenario shows a packet from the Server destined for the Firewall. Switch-A and Switch-B are bundled as VSF stack. The LAG between the VSF stack and the firewall indicates a hash function to forward the packet on port 2/1/2.
Which statement is true regarding how Switch-A will forward the packet?
- A. Switch-A will drop the packet. Multi-Chassis lag to multi-chassis lag is not a supported feature of VSF.
- B. Switch-A will encapsulate the packet using GRE to forward to Switch-B in order for the packet to egress on port 2/1/2 per the hash function.
- C. Switch-A will forward the packet on port 1/1/2. VSF will override the typical LAG hash function used for the physical interface selection.
- D. Switch-A will forward the packet along the VSF link to Switch-B so that it will egress on port 2/1/2 per the hash function.
Answer: D
NEW QUESTION # 47
What is a benefit of choosing a 3-Tier design with routing at the Aggregation layer?
- A. Better Core router performance by offloading processing
- B. Shifting endpoint access to the Aggregation layer from the Access layer
- C. Connecting WAN/MPLS and Data center access to the Aggregation layer
- D. Using access control lists (ACLs) at the Core to improve performance
Answer: A
NEW QUESTION # 48
Match the available stacking feature to the correct AOS-CX switch model. Stacking features may be used more than once.
Answer:
Explanation:
NEW QUESTION # 49
Refer to the exhibit.
All four switches in the diagram have been configured with the region name "Aruba1".
What two other MSTP configurations must match for switches within the same MST region? (Choose two.)
- A. MST version number
- B. MST revision number
- C. MST Bridge ID
- D. MST VLAN to instance mapping
- E. MST region type
Answer: B,D
NEW QUESTION # 50
The section in blue can be ignored.
SW1(config)# interface 1/1/1-1/1/2
SW1(config-if-<1/1/1-1/1/2)# vlan access 2
SW1(config-if-<1/1/1-1/1/2)# exit
SW1(config)# interface 1/1/11-1/1/17
SW1(config-if-<1/1/11-1/1/17)# vlan access 17
SW1(config-if-<1/1/11-1/1/17)# exit
After completing the above commands, what is the expected output of show vlan with no other vlan commanded having been added?
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: B
NEW QUESTION # 51
The customer has 778 developers testing computer games on the network.
Which two actions resolve Broadcast storms? (Choose two.)
- A. Manually disable the redundant link to immediately resolve the impacted portion of the network.
- B. Utilize Spanning Tree to dynamically disable all redundant links in a segment.
- C. Utilize Spanning Tree to dynamically block Designated ports in addition to Alternate ports.
- D. Setting switch ports to half-duplex will resolve Broadcast storms using Carrier Sense Multiple-Access Collision Detection (CSMA/CD).
- E. Enable single Area Open Shortest Path First (OSPF) on all Layer 2 switches, but do not enable routing.
Answer: A,B
NEW QUESTION # 52
Refer to the exhibit.
The above scenario shows a packet from the Server destined for the Firewall. Switch-A and Switch-B are bundled as VSF stack. The LAG between the VSF stack and the firewall indicates a hash function to forward the packet on port 2/1/2.
Which statement is true regarding how Switch-A will forward the packet?
- A. Switch-A will drop the packet. Multi-Chassis lag to multi-chassis lag is not a supported feature of VSF.
- B. Switch-A will encapsulate the packet using GRE to forward to Switch-B in order for the packet to egress on port 2/1/2 per the hash function.
- C. Switch-A will forward the packet on port 1/1/2. VSF will override the typical LAG hash function used for the physical interface selection.
- D. Switch-A will forward the packet along the VSF link to Switch-B so that it will egress on port 2/1/2 per the hash function.
Answer: D
NEW QUESTION # 53
What are two methods for remotely managing an Aruba AOS-CX switch? (Choose two.)
- A. USB-C console
- B. SSH
- C. HTTPS
- D. Telnet
- E. SNMPv2c
Answer: B,C
NEW QUESTION # 54
Which switches support Aruba Virtual Switching Extension (VSX)? (Choose two.)
- A. Aruba 5406R
- B. Aruba 6405
- C. Aruba 2930F
- D. Aruba 8350
- E. Aruba 8400
Answer: B,E
NEW QUESTION # 55
What are two features of the three-tier designs? (Choose two.)
- A. is considered legacy by requiring a large flat layer-two broadcast domain from Core to Access and should be avoided
- B. adds a distribution layer to free up resources from the Core for improved performance and routing throughput
- C. uses only Layer 2 access on the Access and the Core with Layer 3 routing and access control provided at the distribution layer
- D. removes the distribution layer in favor of a spine-leaf design used in modern data center deployments
- E. a more scalable design over by leveraging a distribution layer to handle Layer 3 routing and access control in large deployments
Answer: B,E
NEW QUESTION # 56
......
The ACSA certification is an excellent way for IT professionals to demonstrate their expertise in Aruba switching technology. It is a valuable credential for professionals who work in networking, wireless, and security roles. The ACSA certification is also a prerequisite for advanced Aruba certifications, such as the Aruba Certified Switching Professional (ACSP) and the Aruba Certified Design Expert (ACDX). By earning the ACSA certification, IT professionals can differentiate themselves from their peers and enhance their career prospects.
HPE6-A72 Exam Dumps - Free Demo & 365 Day Updates: https://www.prep4sures.top/HPE6-A72-exam-dumps-torrent.html
Free Sales Ending Soon - Use Real HPE6-A72 PDF Questions: https://drive.google.com/open?id=1Gxu4bGbl048fBxUKeMnL1yj-JxVhQY1c