1Z0-996-20 Practice Test Questions Updated 72 Questions
Oracle 1Z0-996-20 Dumps - Secret To Pass in First Attempt
NEW QUESTION 22
There has been a meter exchange at a service point in the past year.
How many installation events exist for the service point for the past year?
- A. Three
- B. Four
- C. Two
- D. One
- E. None
Answer: D
NEW QUESTION 23
Which three initial measurement data (IMD) exception categories are available when you execute VEE rules?
(Choose three.)
- A. Information
- B. Issue
- C. Complete
- D. Low
- E. Terminate
Answer: A,B,E
NEW QUESTION 24
Which three are important Account concepts that must always be followed? (Choose three.)
- A. Accounts expire when there are no active contracts.
- B. An Account references one or more persons.
- C. Every Account has a unique, system-assigned Account ID.
- D. Bills are produced for an account and are sent to the account persons.
- E. An Account can only reference one and only one person at one time.
Answer: C,D,E
NEW QUESTION 25
Measuring components are either subtractive or consumptive.
Which statement correctly describes these two concepts?
- A. Subtractive measuring components are associated with deductive meters, whereas consumptive measuring components are not.
- B. Subtractive measuring components are associated only with water service, whereas consumptive measuring components are for gas and electric services.
- C. A subtractive measuring component's consumption for a given period of time is the end measurement minus the start measurement. A consumptive measuring component's consumption is simply the measurement itself, and represents the consumption for the period of time since the previous measurement was taken.
- D. Subtractive measuring components are used to measure demand, whereas consumptive measuring components are used to measure how much was consumed since the previous reading.
Answer: D
NEW QUESTION 26
As part of the service order processing, the algorithm D1-CNSPINSDV (Connect SP and/or Install Device) determines if a specific activity needs to be created based on the state of the service point.
Based on the status of the service point, what can this algorithm create?
- A. Service Point
- B. Device Configuration
- C. Device
- D. Smart Meter Command
Answer: A
NEW QUESTION 27
The base package usage transaction business object is represented by D2-UsageTransaction. The usage calculation engine or process drives the specifics of the usage to be calculated on this business object.
Based on this, which three configuration areas will have an impact on the usage calculation process? (Choose three.)
- A. VEE rule
- B. TOU map
- C. Factor Override
- D. Usage Rule
Answer: B,C,D
NEW QUESTION 28
You are configuring a VEE group to include rules to be executed when loading the initial measurement data (IMD).
What is the VEE group directly associated with?
- A. Measuring Component Type
- B. Usage Type
- C. Device Type and Measuring Component Type
- D. Device Type
- E. Device Configuration Type
Answer: E
NEW QUESTION 29
If a customer makes a payment for more than what is due for the account, which entity contains the logic for how this overpayment should be handled?
- A. Pay Segment Type
- B. Service Agreement Type
- C. Tender Type
- D. Customer Class
- E. Installation Options
Answer: B,D,E
NEW QUESTION 30
When configuring the Get Scalar Details usage rule, which three attributes can be defined to retrieve scalar values? (Choose three.)
- A. Service Quantity Identifier
- B. Unit of Measure
- C. Device ID
- D. Time of Use
- E. Service Point ID
Answer: C,D,E
NEW QUESTION 31
When the source of a Financial Transaction is canceled, what does it result in?
- A. The source Financial Transaction status is changed to "Canceled".
- B. A new reversal Financial Transaction is created.
- C. The source Financial Transaction is deleted and a new reversal Financial Transaction is created.
- D. No change occurs.
- E. The source Financial Transaction is deleted.
Answer: C
NEW QUESTION 32
Usage transactions can contain date breaks. Which is used to supply date breaks?
- A. the Usage Subscription BO
- B. the Usage Subscription Type
- C. the requesting system or user input
- D. the Deferred Monitor Calculation Algorithm
Answer: B
NEW QUESTION 33
What Service Order activity types does the application include?
- A. Enable Service; Disable Service; Cut for Non-Payment; Reconnect Service for Payment; Exchange Meter; Back-to-Back Service
- B. Start Service; Stop Service; Cut for Non-Payment; Reconnect Service for Payment; Exchange Meter; Move-In/Move-Out Service
- C. Start Service; Stop Service; Install Meter; Remove Meter; Exchange Meter; Move-In/Move-Out Service
- D. Enable Service; Disable Service; Install Meter; Remove Meter; Exchange Meter; Back-to-Back Service
Answer: A
NEW QUESTION 34
Critical validation rules verify the integrity of the initial measurement data (IMD). If an implementation needs to add new critical validations, where would you configure them?
- A. in the validation algorithm on the IMD Seeder BO (D1-IMDSeeder)
- B. as options on the IMD Seeder BO (D1-IMDSeeder)
- C. in the pre-processing algorithm of the IMD Seeder BO (Dl-IMDSeeder)
- D. in the schema of the IMD Seeder BO (D1-IMDSeeder)
- E. as new lifecycle algorithms on the IMD Seeder BO (D1-IMDSeeder)
Answer: C
NEW QUESTION 35
Your implementation requires an installation of two types of devices:
Electric Smart Meter
Gas Manual Meter
Which two Device Type attributes are required to identify these device types? (Choose two.)
- A. Serial Number
- B. Device Business Object
- C. Service Type
- D. Valid Measuring Component Types
- E. Manufacturer
Answer: C,D
NEW QUESTION 36
For a customer to receive a Subscription communication, what must they have?
- A. an active person contact preference
- B. an active address type preference
- C. an active account contact preference
- D. an active address contact preference
Answer: C
NEW QUESTION 37
Throughout its lifecycle, an asset's disposition changes as it is moved between locations and service statuses.
Which are valid asset dispositions?
- A. Receiving; Installed; Storage; Retired
- B. Receiving; In Field; Storage; Retired
- C. In Receipt; Installed; In Stores; Retired
- D. In Receipt; In Field; In Stores; Retired
Answer: D
NEW QUESTION 38
A usage subscription must exist before usage transactions can be calculated for a specific service point.
Where do you configure the usage recipient?
- A. in the Usage Rule Type
- B. in the Device Type
- C. in the Measuring Component Type
- D. in the Usage Subscription Type
- E. in the Service Point Type
Answer: D
NEW QUESTION 39
Your customer's initial measurement data (IMD) has been imported and can be viewed through the Measuring Component portal, but is not in the "Final" measurement status.
What can you assume that the IMD has passed?
- A. Sum Check Validation
- B. Critical Validation
- C. Multiplier Check Validation
- D. Critical Validation, High/Low Check Validation, and Sum Check Validation
- E. High/Low Check Validation
Answer: C
NEW QUESTION 40
Your client has three requirements:
1. Apply validations on meter reads coming from the Data Collectors.
2. If a meter read does not pass the validation, an error will be generated and assigned to a user.
3. Retry the validation every 30 minutes for the errors in case the issue is related to configuration.
Which statement describes the base functions you should use?
- A. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-CRE-IMDTD (Create To Do)
- B. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-COMP-TD (Complete To Do Entries).
- C. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-IMD-RETRY (Retry Initial Measurement Data Processing)
- D. If a To Do entry is created on the VEE exception, the user will need to discard the IMD and a new IMD will be manually loaded.
- E. If a To Do entry is created on the VEE exception, the user will need to discard the IMD and a new IMD will be loaded after 30 minutes.
Answer: A
NEW QUESTION 41
......
Topics of Oracle 1Z0-996-20: Oracle Utilities Customer Cloud Service 2020 Implementation Essentials Exam
The Oracle 1z0-996 certification exam is based on the learning, key topics, and activities encountered during oracle pieces of training and implementations. The following are the major topics and sub-skills that a candidate should study for the examination. These topics will give the candidates a clear view of which topics and skills one should focus on for the certification.
- Service Points and Install Events Explain the concept of the install event Describe the relationship between devices and service points
- Devices and Measuring Concepts Explain the measuring component and its structures Explain the relationship between devices and measuring components Explain different types of measuring components Ability to Configure device types Ability to Configure measuring component types Ability to Configure device config type Ability to associate measuring component to the device
- Measurements Explain differences between initial measurements, final measurements, and usage Explain the high level process of loading measurements to calculating usage Explain derived values and their association with the final measurements Create a new derive value algorithm Explain different types of IMDs and the differences between them Explain IMD exception status and Automatic Retry functionality
- Rates Manage and Apply Rates for individual commodities and customers Apply Proration Apply Bill Factors
- Billing Maintain and Manage Bill Segments Complete Bills
- Usage Subscription Explain usage subscriptions Explain relationships between measuring components, service points, and usage subscriptions Set up and design admin data required to configure a usage subscription
- Fieldwork and Service Order Management Explain Service Order Activity Explain Service Order Children’s Activities The candidate needs to go through and be proficient in every topic.
- Customer Information Manage and Maintain Customer information based on the needs and requirements
- Adjustments Ability to configure and manage payment adjustments
- Usage Explain the usage calculation process Explain usage transactions and usage subscriptions Use Get Scalar Details usage rule and retrieve scalar measurements for scalar internal measuring components
- Financial Transactions Manage and Maintain Financial transactions
- Operational Device Management Explain assets and components Explain specifications and asset relationships
- Payments Manage and Maintain Payments Manage Overpayment and Payment Distribution
- Monitor Overdue Debts Ability to Configure and Manage Credit & Collections Manage Payment Arrangements and Pay Plans
- VEE Explain the difference between critical validations, validation rules, and their executions Explain the concept of VEE process Ability to configure VEE groups containing base package VEE rules Ability to apply VEE group to device or device types Ability to configure eligibility criteria and criteria field value retrieval algorithms Explain categories of IMD exceptions
The 1z0-996-20 practice tests are designed to render the actual examination experience familiar to students. According to statistics, most students fail the fear of the unexpected not because of their training, but because of exam anxiety. Notes and practice exercises for the 1z0-996 dumps should be prepared. Certification assessment matters are focused on real-world situations which deal with real-time challenges, so it is really important for the applicant to have realistic expertise and understanding of operating in the area of customer cloud technology with Oracle utility applications alongside all the educational materials and tutorials.
Oracle 1Z0-996-20 Exam Dumps [2022] Practice Valid Exam Dumps Question: https://www.prep4sures.top/1Z0-996-20-exam-dumps-torrent.html