[Feb-2024] Get 100% Real SPLK-4001 Free Online Practice Test
BEST Verified Splunk SPLK-4001 Exam Questions (2024)
NEW QUESTION # 12
A DevOps engineer wants to determine if the latency their application experiences is growing fester after a new software release a week ago. They have already created two plot lines, A and B, that represent the current latency and the latency a week ago, respectively. How can the engineer use these two plot lines to determine the rate of change in latency?
- A. Create a plot C using the formula (A/B-l) and add a scale: 100 function to express the rate of change as a percentage.
- B. Create a plot C using the formula (A-B) and add a scale:percent function to express the rate of change as a percentage.
- C. Create a temporary plot by clicking the Change% button in the upper-right corner of the plot showing lines A and B.
- D. Create a temporary plot by dragging items A and B into the Analytics Explorer window.
Answer: A
Explanation:
Explanation
The correct answer is C. Create a plot C using the formula (A/B-l) and add a scale: 100 function to express the rate of change as a percentage.
To calculate the rate of change in latency, you need to compare the current latency (plot A) with the latency a week ago (plot B). One way to do this is to use the formula (A/B-l), which gives you the ratio of the current latency to the previous latency minus one. This ratio represents how much the current latency has increased or decreased relative to the previous latency. For example, if the current latency is 200 ms and the previous latency is 100 ms, then the ratio is (200/100-l) = 1, which means the current latency is 100% higher than the previous latency1 To express the rate of change as a percentage, you need to multiply the ratio by 100. You can do this by adding a scale: 100 function to the formula. This function scales the values of the plot by a factor of 100. For example, if the ratio is 1, then the scaled value is 100%2 To create a plot C using the formula (A/B-l) and add a scale: 100 function, you need to follow these steps:
Select plot A and plot B from the Metric Finder.
Click on Add Analytics and choose Formula from the list of functions.
In the Formula window, enter (A/B-l) as the formula and click Apply.
Click on Add Analytics again and choose Scale from the list of functions.
In the Scale window, enter 100 as the factor and click Apply.
You should see a new plot C that shows the rate of change in latency as a percentage.
To learn more about how to use formulas and scale functions in Splunk Observability Cloud, you can refer to these documentations34.
1: https://www.mathsisfun.com/numbers/percentage-change.html 2:
https://docs.splunk.com/Observability/gdi/metrics/analytics.html#Scale 3:
https://docs.splunk.com/Observability/gdi/metrics/analytics.html#Formula 4:
https://docs.splunk.com/Observability/gdi/metrics/analytics.html#Scale
NEW QUESTION # 13
How is it possible to create a dashboard group that no one else can edit?
- A. Link the dashboard group to the team.
- B. Ask the admin to lock the dashboard group.
- C. Restrict the write access on the dashboard group.
- D. Hide the edit menu on the dashboard group.
Answer: C
Explanation:
Explanation
According to the web search results, dashboard groups are a feature of Splunk Observability Cloud that allows you to organize and share dashboards with other users in your organization1. You can set permissions for each dashboard group, such as who can view, edit, or manage the dashboards in the group1. To create a dashboard group that no one else can edit, you need to do the following steps:
Create a dashboard group as usual, by selecting Dashboard Group from the Create menu on the navigation bar, entering a name and description, and adding dashboards to the group1.
Select Alert settings from the Dashboard actions menu () on the top right corner of the dashboard group. This will open a dialog box where you can configure the permissions for the dashboard group1.
Under Write access, select Only me. This will restrict the write access to the dashboard group to yourself only. No one else will be able to edit or delete the dashboards in the group1.
Click Save. This will create a dashboard group that no one else can edit.
NEW QUESTION # 14
For a high-resolution metric, what is the highest possible native resolution of the metric?
- A. 15 seconds
- B. 5 seconds
- C. 1 second
- D. 2 seconds
Answer: C
Explanation:
Explanation
The correct answer is C. 1 second.
According to the Splunk Test Blueprint - O11y Cloud Metrics User document1, one of the metrics concepts that is covered in the exam is data resolution and rollups. Data resolution refers to the granularity of the metric data points, and rollups are the process of aggregating data points over time to reduce the amount of data stored.
The Splunk O11y Cloud Certified Metrics User Track document2 states that one of the recommended courses for preparing for the exam is Introduction to Splunk Infrastructure Monitoring, which covers the basics of metrics monitoring and visualization.
In the Introduction to Splunk Infrastructure Monitoring course, there is a section on Data Resolution and Rollups, which explains that Splunk Observability Cloud collects high-resolution metrics at 1-second intervals by default, and then applies rollups to reduce the data volume over time. The document also provides a table that shows the different rollup intervals and retention periods for different resolutions.
Therefore, based on these documents, we can conclude that for a high-resolution metric, the highest possible native resolution of the metric is 1 second.
NEW QUESTION # 15
A Software Engineer is troubleshooting an issue with memory utilization in their application. They released a new canary version to production and now want to determine if the average memory usage is lower for requests with the 'canary' version dimension. They've already opened the graph of memory utilization for their service.
How does the engineer see if the new release lowered average memory utilization?
- A. On the chart for plot A, scroll to the end and click Enter Function, then enter 'A/B-l'.
- B. On the chart for plot A, select Add Analytics, then select MeanrTransformation. In the window that appears, select 'version' from the Group By field.
- C. On the chart for plot A, select Add Analytics, then select Mean:Aggregation. In the window that appears, select 'version' from the Group By field.
- D. On the chart for plot A, click the Compare Means button. In the window that appears, type 'version1.
Answer: C
Explanation:
Explanation
The correct answer is C. On the chart for plot A, select Add Analytics, then select Mean:Aggregation. In the window that appears, select 'version' from the Group By field.
This will create a new plot B that shows the average memory utilization for each version of the application.
The engineer can then compare the values of plot B for the 'canary' and 'stable' versions to see if there is a significant difference.
To learn more about how to use analytics functions in Splunk Observability Cloud, you can refer to this documentation1.
1: https://docs.splunk.com/Observability/gdi/metrics/analytics.html
NEW QUESTION # 16
Which of the following is optional, but highly recommended to include in a datapoint?
- A. Metric type
- B. Metric name
- C. Timestamp
- D. Value
Answer: A
Explanation:
Explanation
The correct answer is D. Metric type.
A metric type is an optional, but highly recommended field that specifies the kind of measurement that a datapoint represents. For example, a metric type can be gauge, counter, cumulative counter, or histogram. A metric type helps Splunk Observability Cloud to interpret and display the data correctly1 To learn more about how to send metrics to Splunk Observability Cloud, you can refer to this documentation2.
1: https://docs.splunk.com/Observability/gdi/metrics/metrics.html#Metric-types 2:
https://docs.splunk.com/Observability/gdi/metrics/metrics.html
NEW QUESTION # 17
An SRE came across an existing detector that is a good starting point for a detector they want to create. They clone the detector, update the metric, and add multiple new signals. As a result of the cloned detector, which of the following is true?
- A. The new signals will be reflected in the original chart.
- B. The new signals will be reflected in the original detector.
- C. You can only monitor one of the new signals.
- D. The new signals will not be added to the original detector.
Answer: D
Explanation:
Explanation
According to the Splunk O11y Cloud Certified Metrics User Track document1, cloning a detector creates a copy of the detector that you can modify without affecting the original detector. You can change the metric, filter, and signal settings of the cloned detector. However, the new signals that you add to the cloned detector will not be reflected in the original detector, nor in the original chart that the detector was based on. Therefore, option D is correct.
Option A is incorrect because the new signals will not be reflected in the original detector. Option B is incorrect because the new signals will not be reflected in the original chart. Option C is incorrect because you can monitor all of the new signals that you add to the cloned detector.
NEW QUESTION # 18
A customer wants to share a collection of charts with their entire SRE organization. What feature of Splunk Observability Cloud makes this possible?
- A. Public dashboards
- B. Dashboard groups
- C. Chart exporter
- D. Shared charts
Answer: B
Explanation:
Explanation
According to the web search results, dashboard groups are a feature of Splunk Observability Cloud that allows you to organize and share dashboards with other users in your organization1. You can create dashboard groups based on different criteria, such as service, team, role, or topic. You can also set permissions for each dashboard group, such as who can view, edit, or manage the dashboards in the group. Dashboard groups make it possible to share a collection of charts with your entire SRE organization, or any other group of users that you want to collaborate with.
NEW QUESTION # 19
Which analytic function can be used to discover peak page visits for a site over the last day?
- A. Maximum: Transformation (24h)
- B. Count: (Id)
- C. Maximum: Aggregation (Id)
- D. Lag: (24h)
Answer: A
Explanation:
Explanation
According to the Splunk Observability Cloud documentation1, the maximum function is an analytic function that returns the highest value of a metric or a dimension over a specified time interval. The maximum function can be used as a transformation or an aggregation. A transformation applies the function to each metric time series (MTS) individually, while an aggregation applies the function to all MTS and returns a single value. For example, to discover the peak page visits for a site over the last day, you can use the following SignalFlow code:
maximum(24h, counters("page.visits"))
This will return the highest value of the page.visits counter metric for each MTS over the last 24 hours. You can then use a chart to visualize the results and identify the peak page visits for each MTS.
NEW QUESTION # 20
Which of the following are true about organization metrics? (select all that apply)
- A. Organization metrics count towards custom MTS limits.
- B. A user can plot and alert on them like metrics they send to Splunk Observability Cloud.
- C. Organization metrics are included for free.
- D. Organization metrics give insights into system usage, system limits, data ingested and token quotas.
Answer: B,C,D
Explanation:
Explanation
The correct answer is A, C, and D. Organization metrics give insights into system usage, system limits, data ingested and token quotas. Organization metrics are included for free. A user can plot and alert on them like metrics they send to Splunk Observability Cloud.
Organization metrics are a set of metrics that Splunk Observability Cloud provides to help you measure your organization's usage of the platform. They include metrics such as:
Ingest metrics: Measure the data you're sending to Infrastructure Monitoring, such as the number of data points you've sent.
App usage metrics: Measure your use of application features, such as the number of dashboards in your organization.
Integration metrics: Measure your use of cloud services integrated with your organization, such as the number of calls to the AWS CloudWatch API.
Resource metrics: Measure your use of resources that you can specify limits for, such as the number of custom metric time series (MTS) you've created1 Organization metrics are not charged and do not count against any system limits. You can view them in built-in charts on the Organization Overview page or in custom charts using the Metric Finder. You can also create alerts based on organization metrics to monitor your usage and performance1 To learn more about how to use organization metrics in Splunk Observability Cloud, you can refer to this documentation1.
1: https://docs.splunk.com/observability/admin/org-metrics.html
NEW QUESTION # 21
A customer has a large population of servers. They want to identify the servers where utilization has increased the most since last week. Which analytics function is needed to achieve this?
- A. Tlmeshift
- B. Sum transformation
- C. Rate
- D. Standard deviation
Answer: A
Explanation:
Explanation
The correct answer is C. Timeshift.
According to the Splunk Observability Cloud documentation1, timeshift is an analytic function that allows you to compare the current value of a metric with its value at a previous time interval, such as an hour ago or a week ago. You can use the timeshift function to measure the change in a metric over time and identify trends, anomalies, or patterns. For example, to identify the servers where utilization has increased the most since last week, you can use the following SignalFlow code:
timeshift(1w, counters("server.utilization"))
This will return the value of the server.utilization counter metric for each server one week ago. You can then subtract this value from the current value of the same metric to get the difference in utilization. You can also use a chart to visualize the results and sort them by the highest difference in utilization.
NEW QUESTION # 22
The built-in Kubernetes Navigator includes which of the following?
- A. Map, Nodes, Processors, Node Detail, Workload Detail, Pod Detail, Container Detail
- B. Map, Nodes, Workloads, Node Detail, Workload Detail, Pod Detail, Container Detail
- C. Map, Clusters, Workloads, Node Detail, Workload Detail, Pod Detail, Container Detail
- D. Map, Nodes, Workloads, Node Detail, Workload Detail, Group Detail, Container Detail
Answer: B
Explanation:
Explanation
The correct answer is D. Map, Nodes, Workloads, Node Detail, Workload Detail, Pod Detail, Container Detail.
The built-in Kubernetes Navigator is a feature of Splunk Observability Cloud that provides a comprehensive and intuitive way to monitor the performance and health of Kubernetes environments. It includes the following views:
Map: A graphical representation of the Kubernetes cluster topology, showing the relationships and dependencies among nodes, pods, containers, and services. You can use the map to quickly identify and troubleshoot issues in your cluster1 Nodes: A tabular view of all the nodes in your cluster, showing key metrics such as CPU utilization, memory usage, disk usage, and network traffic. You can use the nodes view to compare and analyze the performance of different nodes1 Workloads: A tabular view of all the workloads in your cluster, showing key metrics such as CPU utilization, memory usage, network traffic, and error rate. You can use the workloads view to compare and analyze the performance of different workloads, such as deployments, stateful sets, daemon sets, or jobs1 Node Detail: A detailed view of a specific node in your cluster, showing key metrics and charts for CPU utilization, memory usage, disk usage, network traffic, and pod count. You can also see the list of pods running on the node and their status. You can use the node detail view to drill down into the performance of a single node2 Workload Detail: A detailed view of a specific workload in your cluster, showing key metrics and charts for CPU utilization, memory usage, network traffic, error rate, and pod count. You can also see the list of pods belonging to the workload and their status. You can use the workload detail view to drill down into the performance of a single workload2 Pod Detail: A detailed view of a specific pod in your cluster, showing key metrics and charts for CPU utilization, memory usage, network traffic, error rate, and container count. You can also see the list of containers within the pod and their status. You can use the pod detail view to drill down into the performance of a single pod2 Container Detail: A detailed view of a specific container in your cluster, showing key metrics and charts for CPU utilization, memory usage, network traffic, error rate, and log events. You can use the container detail view to drill down into the performance of a single container2 To learn more about how to use Kubernetes Navigator in Splunk Observability Cloud, you can refer to this documentation3.
1: https://docs.splunk.com/observability/infrastructure/monitor/k8s-nav.html#Kubernetes-Navigator 2:
https://docs.splunk.com/observability/infrastructure/monitor/k8s-nav.html#Detail-pages 3:
https://docs.splunk.com/observability/infrastructure/monitor/k8s-nav.html
NEW QUESTION # 23
A customer is experiencing an issue where their detector is not sending email notifications but is generating alerts within the Splunk Observability UI. Which of the below is the root cause?
- A. The detector is disabled.
- B. The detector has an incorrect alert rule.
- C. The detector has an incorrect signal,
- D. The detector has a muting rule.
Answer: D
Explanation:
Explanation
The most likely root cause of the issue is D. The detector has a muting rule.
A muting rule is a way to temporarily stop a detector from sending notifications for certain alerts, without disabling the detector or changing its alert conditions. A muting rule can be useful when you want to avoid alert noise during planned maintenance, testing, or other situations where you expect the metrics to deviate from normal1 When a detector has a muting rule, it will still generate alerts within the Splunk Observability UI, but it will not send email notifications or any other types of notifications that you have configured for the detector. You can see if a detector has a muting rule by looking at the Muting Rules tab on the detector page. You can also create, edit, or delete muting rules from there1 To learn more about how to use muting rules in Splunk Observability Cloud, you can refer to this documentation1.
NEW QUESTION # 24
Which of the following can be configured when subscribing to a built-in detector?
- A. Links to a chart.
- B. Outbound notifications.
- C. Alerts on a dashboard.
- D. Alerts on team landing page.
Answer: B
Explanation:
Explanation
According to the web search results1, subscribing to a built-in detector is a way to receive alerts and notifications from Splunk Observability Cloud when certain criteria are met. A built-in detector is a detector that is automatically created and configured by Splunk Observability Cloud based on the data from your integrations, such as AWS, Kubernetes, or OpenTelemetry1. To subscribe to a built-in detector, you need to do the following steps:
Find the built-in detector that you want to subscribe to. You can use the metric finder or the dashboard groups to locate the built-in detectors that are relevant to your data sources1.
Hover over the built-in detector and click the Subscribe button. This will open a dialog box where you can configure your subscription settings1.
Choose an outbound notification channel from the drop-down menu. This is where you can specify how you want to receive the alert notifications from the built-in detector. You can choose from various channels, such as email, Slack, PagerDuty, webhook, and so on2. You can also create a new notification channel by clicking the + icon2.
Enter the notification details for the selected channel. This may include your email address, Slack channel name, PagerDuty service key, webhook URL, and so on2. You can also customize the notification message with variables and markdown formatting2.
Click Save. This will subscribe you to the built-in detector and send you alert notifications through the chosen channel when the detector triggers or clears an alert.
Therefore, option C is correct.
NEW QUESTION # 25
The Sum Aggregation option for analytic functions does which of the following?
- A. Calculates the sum of values per time series across a period of time.
- B. Calculates the sum of values present in the input time series across the entire environment or per group.
- C. Calculates 1/2 of the values present in the input time series.
- D. Calculates the number of MTS present in the plot.
Answer: B
Explanation:
Explanation
According to the Splunk Test Blueprint - O11y Cloud Metrics User document1, one of the metrics concepts that is covered in the exam is analytic functions. Analytic functions are mathematical operations that can be applied to metrics to transform, aggregate, or analyze them.
The Splunk O11y Cloud Certified Metrics User Track document2 states that one of the recommended courses for preparing for the exam is Introduction to Splunk Infrastructure Monitoring, which covers the basics of metrics monitoring and visualization.
In the Introduction to Splunk Infrastructure Monitoring course, there is a section on Analytic Functions, which explains that analytic functions can be used to perform calculations on metrics, such as sum, average, min, max, count, etc. The document also provides examples of how to use analytic functions in charts and dashboards.
One of the analytic functions that can be used is Sum Aggregation, which calculates the sum of values present in the input time series across the entire environment or per group. The document gives an example of how to use Sum Aggregation to calculate the total CPU usage across all hosts in a group by using the following syntax:
sum(cpu.utilization) by hostgroup
NEW QUESTION # 26
To smooth a very spiky cpu.utilization metric, what is the correct analytic function to better see if the cpu.
utilization for servers is trending up over time?
- A. Rate/Sec
- B. Mean (Transformation)
- C. Mean (by host)
- D. Median
Answer: B
Explanation:
Explanation
The correct answer is D. Mean (Transformation).
According to the web search results, a mean transformation is an analytic function that returns the average value of a metric or a dimension over a specified time interval1. A mean transformation can be used to smooth a very spiky metric, such as cpu.utilization, by reducing the impact of outliers and noise. A mean transformation can also help to see if the metric is trending up or down over time, by showing the general direction of the average value. For example, to smooth the cpu.utilization metric and see if it is trending up over time, you can use the following SignalFlow code:
mean(1h, counters("cpu.utilization"))
This will return the average value of the cpu.utilization counter metric for each metric time series (MTS) over the last hour. You can then use a chart to visualize the results and compare the mean values across different MTS.
Option A is incorrect because rate/sec is not an analytic function, but rather a rollup function that returns the rate of change of data points in the MTS reporting interval1. Rate/sec can be used to convert cumulative counter metrics into counter metrics, but it does not smooth or trend a metric. Option B is incorrect because median is not an analytic function, but rather an aggregation function that returns the middle value of a metric or a dimension over the entire time range1. Median can be used to find the typical value of a metric, but it does not smooth or trend a metric. Option C is incorrect because mean (by host) is not an analytic function, but rather an aggregation function that returns the average value of a metric or a dimension across all MTS with the same host dimension1. Mean (by host) can be used to compare the performance of different hosts, but it does not smooth or trend a metric.
Mean (Transformation) is an analytic function that allows you to smooth a very spiky metric by applying a moving average over a specified time window. This can help you see the general trend of the metric over time, without being distracted by the short-term fluctuations1 To use Mean (Transformation) on a cpu.utilization metric, you need to select the metric from the Metric Finder, then click on Add Analytics and choose Mean (Transformation) from the list of functions. You can then specify the time window for the moving average, such as 5 minutes, 15 minutes, or 1 hour. You can also group the metric by host or any other dimension to compare the smoothed values across different servers2 To learn more about how to use Mean (Transformation) and other analytic functions in Splunk Observability Cloud, you can refer to this documentation2.
1: https://docs.splunk.com/Observability/gdi/metrics/analytics.html#Mean-Transformation 2:
https://docs.splunk.com/Observability/gdi/metrics/analytics.html
NEW QUESTION # 27
What are the best practices for creating detectors? (select all that apply)
- A. View detector in a chart.
- B. View data at highest resolution.
- C. Have a consistent value.
- D. Have a consistent type of measurement.
Answer: A,B,C,D
Explanation:
Explanation
The best practices for creating detectors are:
View data at highest resolution. This helps to avoid missing important signals or patterns in the data that could indicate anomalies or issues1 Have a consistent value. This means that the metric or dimension used for detection should have a clear and stable meaning across different sources, contexts, and time periods. For example, avoid using metrics that are affected by changes in configuration, sampling, or aggregation2 View detector in a chart. This helps to visualize the data and the detector logic, as well as to identify any false positives or negatives. It also allows to adjust the detector parameters and thresholds based on the data distribution and behavior3 Have a consistent type of measurement. This means that the metric or dimension used for detection should have the same unit and scale across different sources, contexts, and time periods. For example, avoid mixing bytes and bits, or seconds and milliseconds.
1: https://docs.splunk.com/Observability/gdi/metrics/detectors.html#Best-practices-for-detectors 2:
https://docs.splunk.com/Observability/gdi/metrics/detectors.html#Best-practices-for-detectors 3:
https://docs.splunk.com/Observability/gdi/metrics/detectors.html#View-detector-in-a-chart :
https://docs.splunk.com/Observability/gdi/metrics/detectors.html#Best-practices-for-detectors
NEW QUESTION # 28
Which of the following are required in the configuration of a data point? (select all that apply)
- A. Metric Name
- B. Timestamp
- C. Metric Type
- D. Value
Answer: A,B,D
Explanation:
Explanation
The required components in the configuration of a data point are:
Metric Name: A metric name is a string that identifies the type of measurement that the data point represents, such as cpu.utilization, memory.usage, or response.time. A metric name is mandatory for every data point, and it must be unique within a Splunk Observability Cloud organization1 Timestamp: A timestamp is a numerical value that indicates the time at which the data point was collected or generated. A timestamp is mandatory for every data point, and it must be in epoch time format, which is the number of seconds since January 1, 1970 UTC1 Value: A value is a numerical value that indicates the magnitude or quantity of the measurement that the data point represents. A value is mandatory for every data point, and it must be compatible with the metric type of the data point1 Therefore, the correct answer is A, C, and D.
To learn more about how to configure data points in Splunk Observability Cloud, you can refer to this documentation1.
1: https://docs.splunk.com/Observability/gdi/metrics/metrics.html#Data-points
NEW QUESTION # 29
With exceptions for transformations or timeshifts, at what resolution do detectors operate?
- A. The resolution of the dashboard
- B. Native resolution
- C. 10 seconds
- D. The resolution of the chart
Answer: B
Explanation:
Explanation
According to the Splunk Observability Cloud documentation1, detectors operate at the native resolution of the metric or dimension that they monitor, with some exceptions for transformations or timeshifts. The native resolution is the frequency at which the data points are reported by the source. For example, if a metric is reported every 10 seconds, the detector will evaluate the metric every 10 seconds. The native resolution ensures that the detector uses the most granular and accurate data available for alerting.
NEW QUESTION # 30
When installing OpenTelemetry Collector, which error message is indicative that there is a misconfigured realm or access token?
- A. 403 (NOT ALLOWED)
- B. 404 (NOT FOUND)
- C. 401 (UNAUTHORIZED)
- D. 503 (SERVICE UNREACHABLE)
Answer: C
Explanation:
Explanation
The correct answer is C. 401 (UNAUTHORIZED).
According to the web search results, a 401 (UNAUTHORIZED) error message is indicative that there is a misconfigured realm or access token when installing OpenTelemetry Collector1. A 401 (UNAUTHORIZED) error message means that the request was not authorized by the server due to invalid credentials. A realm is a parameter that specifies the scope of protection for a resource, such as a Splunk Observability Cloud endpoint.
An access token is a credential that grants access to a resource, such as a Splunk Observability Cloud API. If the realm or the access token is misconfigured, the request to install OpenTelemetry Collector will be rejected by the server with a 401 (UNAUTHORIZED) error message.
Option A is incorrect because a 403 (NOT ALLOWED) error message is not indicative that there is a misconfigured realm or access token when installing OpenTelemetry Collector. A 403 (NOT ALLOWED) error message means that the request was authorized by the server but not allowed due to insufficient permissions. Option B is incorrect because a 404 (NOT FOUND) error message is not indicative that there is a misconfigured realm or access token when installing OpenTelemetry Collector. A 404 (NOT FOUND) error message means that the request was not found by the server due to an invalid URL or resource. Option D is incorrect because a 503 (SERVICE UNREACHABLE) error message is not indicative that there is a misconfigured realm or access token when installing OpenTelemetry Collector. A 503 (SERVICE UNREACHABLE) error message means that the server was unable to handle the request due to temporary overload or maintenance.
NEW QUESTION # 31
What constitutes a single metrics time series (MTS)?
- A. A series of timestamps that all reflect the same metric.
- B. A set of data points that use different dimensions but the same metric name.
- C. A set of data points that all have the same metric name and list of dimensions.
- D. A set of metrics that are ordered in series based on timestamp.
Answer: C
Explanation:
Explanation
The correct answer is B. A set of data points that all have the same metric name and list of dimensions.
A metric time series (MTS) is a collection of data points that have the same metric and the same set of dimensions. For example, the following sets of data points are in three separate MTS:
MTS1: Gauge metric cpu.utilization, dimension "hostname": "host1" MTS2: Gauge metric cpu.utilization, dimension "hostname": "host2" MTS3: Gauge metric memory.usage, dimension "hostname": "host1" A metric is a numerical measurement that varies over time, such as CPU utilization or memory usage. A dimension is a key-value pair that provides additional information about the metric, such as the hostname or the location. A data point is a combination of a metric, a dimension, a value, and a timestamp1
NEW QUESTION # 32
One server in a customer's data center is regularly restarting due to power supply issues. What type of dashboard could be used to view charts and create detectors for this server?
- A. Multiple-service dashboard
- B. Single-instance dashboard
- C. Server dashboard
- D. Machine dashboard
Answer: B
Explanation:
Explanation
According to the Splunk O11y Cloud Certified Metrics User Track document1, a single-instance dashboard is a type of dashboard that displays charts and information for a single instance of a service or host. You can use a single-instance dashboard to monitor the performance and health of a specific server, such as the one that is restarting due to power supply issues. You can also create detectors for the metrics that are relevant to the server, such as CPU usage, memory usage, disk usage, and uptime. Therefore, option A is correct.
NEW QUESTION # 33
A customer is experiencing an issue where their detector is not sending email notifications but is generating alerts within the Splunk Observability UI. Which of the below is the root cause?
- A. The detector is disabled.
- B. The detector has an incorrect alert rule.
- C. The detector has an incorrect signal,
- D. The detector has a muting rule.
Answer: D
Explanation:
Explanation
The most likely root cause of the issue is D. The detector has a muting rule.
A muting rule is a way to temporarily stop a detector from sending notifications for certain alerts, without disabling the detector or changing its alert conditions. A muting rule can be useful when you want to avoid alert noise during planned maintenance, testing, or other situations where you expect the metrics to deviate from normal1 When a detector has a muting rule, it will still generate alerts within the Splunk Observability UI, but it will not send email notifications or any other types of notifications that you have configured for the detector. You can see if a detector has a muting rule by looking at the Muting Rules tab on the detector page. You can also create, edit, or delete muting rules from there1 To learn more about how to use muting rules in Splunk Observability Cloud, you can refer to this documentation1.
NEW QUESTION # 34
......
To prepare for the SPLK-4001 exam, candidates should have a solid understanding of the Splunk O11y Cloud platform, as well as experience using Splunk's monitoring and observability tools. It is also recommended that candidates have experience working with cloud-based platforms and have a strong understanding of data analysis and visualization techniques. The Splunk SPLK-4001 exam is an excellent way for professionals to demonstrate their expertise in using Splunk's O11y Cloud platform for metrics and data analytics and can help advance their careers in the field.
SPLK-4001 Exam Dumps, Practice Test Questions BUNDLE PACK: https://www.prep4sures.top/SPLK-4001-exam-dumps-torrent.html
The Best Practice Test Preparation for the SPLK-4001 Certification Exam: https://drive.google.com/open?id=11N5xJesBN6ALjq_vlo2mAEvuOlq3UgU6