[Jun-2024] Updated and Accurate 500-470 Questions & Answers for passing the exam Quickly
Download Real 500-470 Exam Dumps for candidates. 100% Free Dump Files
Cisco 500-470 Exam is designed to test the knowledge and competency of system engineers in implementing and managing Cisco's Enterprise Networks SDA, SDWAN and ISE solutions. Cisco Enterprise Networks SDA, SDWAN and ISE Exam for System Engineers certification exam covers a wide range of topics, including software-defined networking, network programmability, traffic segmentation, virtualization, network automation, and security.
NEW QUESTION # 22
How many bytes does a VxLAN header add to an original Ethernet frame?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 23
What is the default interval for BFD packets?
- A. 5 seconds
- B. 1 second
- C. 15 seconds
- D. 10 seconds
Answer: B
NEW QUESTION # 24
Which two factors are used in calculating the Cisco SD WAN - 1yr, 3yr, or 5yr subscription cost? (Choose two.)
- A. Service Bandwidth
- B. Hypervisor Platform
- C. Routing Protocol
- D. Security
- E. Features
Answer: A,E
NEW QUESTION # 25
What is a challenge of having an SD-Access Centralized design where a single fabric encompasses the main site and all branch sites across the WAN?
- A. Since the traffic is encapsulated. SD-WAN features can't be used to optimize/route traffic.
- B. SSIDs would be the same across all sites
- C. End to End Routing is not supported
- D. DNA Center does not support it
Answer: C
NEW QUESTION # 26
Which three services must be enabled under the ISE Admin settings to successfully integrateISE, when integrating ISE with DNA-C? (Choose three.)
- A. Passive Identity Service
- B. Infoblox
- C. PxGrid
- D. Threat-Centric NAC
- E. SXP services
- F. ServiceNow
Answer: B,E,F
Explanation:
Explanation
Cisco ISE configuration capabilities include the following features:
ISE Deployment Assistant (IDA): This is a built-in application designed to accelerate the deployment of Cisco Identity Service Engine (ISE) by providing a guided workflow for configuring the most common ISE use cases, such as guest access, BYOD, and secure wired and wireless access1. IDA also provides validation checks, best practices, and troubleshooting tips to ensure a successful deployment.
Wireless Setup Wizard and Visibility Wizard: These are two of the several wizards that Cisco ISE provides to simplify the configuration of various ISE functions and features. The Wireless Setup Wizard helps to configure the wireless network settings, such as SSIDs, authentication methods, and policies, for secure wireless access2. The Visibility Wizard helps to enable the ISE profiling service, which collects and analyzes endpoint data to identify, classify, and monitor devices on the network3.
ISE Wizards and Pre-Canned Configurations: These are the tools that ease the ISE roll-out significantly by providing ready-made templates, policies, and settings for common ISE scenarios, such as posture assessment, device administration, and threat-centric NAC. These tools help to reduce the manual configuration efforts and errors, and speed up the time to value.
References:
1: [Cisco Identity Services Engine Administrator Guide, Release 3.3 - ISE Deployment Assistant [Cisco Identity Services Engine]] : 2: [Cisco Identity Services Engine Administrator Guide, Release 3.3 - Wireless Setup Wizard [Cisco Identity Services Engine]] : 3: [Cisco Identity Services Engine Administrator Guide, Release 3.3 - Visibility Wizard [Cisco Identity Services Engine]] : : [Cisco Identity Services Engine Administrator Guide, Release 3.3 - ISE Wizards and Pre-Canned Configurations [Cisco Identity Services Engine]]
NEW QUESTION # 27
Which protocol is used between an Endpoint and a Switch with an 802.1 authentication?
- A. TACACS
- B. RADIUS
- C. EAP
- D. MAB
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750/software/release/15-0_2_se
/configuration/guide/scg3750/sw8021x.pdf
The protocol that is used between an endpoint and a switch with an 802.1 authentication is EAP, which stands for Extensible Authentication Protocol. EAP is a framework that defines how the endpoint (also called the supplicant) and the switch (also called the authenticator) exchange authentication messages over a wired or wireless network. EAP supports various authentication methods, such as passwords, certificates, tokens, or biometrics, and can be encapsulated in different transport protocols, such as RADIUS, Diameter, or EAPOL. EAP is used in 802.1X authentication, which is a standard for port-based network access control that prevents unauthorized access to a network1.
The other options, TACACS, MAB, and RADIUS, are not protocols that are used between an endpoint and a switch with an 802.1 authentication. TACACS is a protocol that provides remote authentication and authorization for network devices, such as routers or switches, but it is not used for endpoint authentication.
MAB is a technique that uses the MAC address of an endpoint as a credential for 802.1X authentication, but it is not a protocol itself. RADIUS is a protocol that provides centralized authentication, authorization, and accounting for network access, but it is not used directly between the endpoint and the switch, but rather between the switch and the authentication server1. References := : 2: What Is 802.1X Authentication? How Does 802.1x Work? - Fortinet2, 1: IEEE 802.1X - Wikipedia1
NEW QUESTION # 28
Whatis a challenge of having an SD-Access Centralized design where a single fabric encompasses the main site and all branch sites across the WAN?
- A. Since the traffic is encapsulated, SD-WAN features can't be used to optimize/route traffic.
- B. SSIDs would be the same across all sites
- C. End to End Routing is not supported
- D. DNA Center does not support it.
Answer: A
NEW QUESTION # 29
Which are three Cisco recommendations on "How to Win"? (Choose three.)
- A. Talk about Cisco's focus on Security and integration with StealthWatch, Sourcefire, WSA, vulnerability scanner to make smarter policy decisions.
- B. Explain architectural advantage of holistic Cisco solution.
- C. Demonstrate complex policy flows, rather show case Wizards and enhanced context visibility.
- D. Explain support for 3rd party network devices.
- E. Show case Cisco portfolio or ISE feature set during PoC
Answer: A,B,D
NEW QUESTION # 30
Which three wireless product families are supported in the current DNA-C 1.1 release? (Choose three.)
- A. AP 3800
- B. WLC 8540
- C. WLC 3504
- D. WLC 5508
- E. AP 1260
Answer: A,B,C
NEW QUESTION # 31
Which three methods can be implemented and deployed to gather data and provide insight? (Choose three.)
- A. Syslog
- B. BUM traffic
- C. ARP caching
- D. FNF
- E. IPv6
- F. SNMP
Answer: A,D,F
NEW QUESTION # 32
Which Cisco SD WAN component provides a secure data plane with remote vEdge routers?
- A. vBond
- B. vEdge
- C. vSmart
- D. vManage
Answer: C
Explanation:
Explanation
Reference :https://sdwan-docs.cisco.com/Product_Documentation/Software_Features/ Release_18.1/05Security/01Security_Overview/Data_Plane_Security_Overview
NEW QUESTION # 33
Whatis a challenge of having an SD-Access Centralized design where a single fabric encompasses the main site and all branch sites across the WAN?
- A. Since the traffic is encapsulated, SD-WAN features can't be used to optimize/route traffic.
- B. SSIDs would be the same across all sites
- C. End to End Routing is not supported
- D. DNA Center does not support it.
Answer: A
Explanation:
Explanation
A centralized SD-Access design is where a single fabric domain spans across the main site and all branch sites over the WAN. This design has some challenges, such as:
Since the traffic is encapsulated in VXLAN headers, SD-WAN features such as application-aware routing, QoS, and security policies cannot be applied to the traffic based on the original IP headers. This means that the SD-WAN controller cannot optimize or route the traffic based on the application or user identity. The traffic is treated as a single class of service across the WAN.
The centralized design also introduces a single point of failure and a potential bottleneck at the main site, where the border nodes and the control plane nodes are located. If the main site goes down or the WAN link fails, the branch sites will lose connectivity to the fabric domain and the external networks.
The centralized design also requires a high bandwidth and low latency WAN connection between the main site and the branch sites, which may not be feasible or cost-effective for some scenarios.
References :=
Some possible references are:
Cisco Enterprise Networks SDA, SDWAN and ISE Exam for System Engineers (ENSDENG) Study Guide Cisco SD-Access and SD-WAN Integration Design Guide
NEW QUESTION # 34
Which is a key function of a Digital Network?
- A. Provides secure data plane with remote vEdge routers
- B. Software upgrades
- C. Nat traversal
- D. Centralized provisioning
Answer: D
Explanation:
Explanation
A Digital Network is a network that is based on the Cisco Digital Network Architecture (Cisco DNA), which is an open and extensible, software-driven network architecture designed to rapidly deliver services that enable IT to innovate faster, reduce costs and complexity, lower risk, and comply with regulatory requirements1. A key function of a Digital Network is centralized provisioning, which allows IT to automate the deployment and configuration of network devices and services using a single platform, such as the Cisco DNA Center2.
Centralized provisioning simplifies network management, reduces human errors, and accelerates network changes.
References:
2: [Cisco DNA Software - Digital Network Architecture - Cisco] : 1: [Cisco Digital Network Architecture]
NEW QUESTION # 35
Which two are benefits from a WAN design? (Choose two.)
- A. Reduce cost and increase operational complexity
- B. Provide lower quality service to guest users
- C. Ensure remote site uptime
- D. Prioritize and secure with granular control
- E. Lower circuit bandwidth requirements
Answer: C,D
NEW QUESTION # 36
Which three options describe fabric overlay concepts? (Choose three.)
- A. An Overlay is a logical topology
- B. GRE is a type of Overlay
- C. An Overlay uses alternate forwarding attributes
- D. Intermediate System to Intermediate System
- E. A link state routing protocol like OSPF
- F. A virtual Local Area Network
Answer: A,B,C
NEW QUESTION # 37
Which three methods three technologies and deployed to gather data and provide insight? (Choose three.)
- A. Syslog
- B. BUM traffic
- C. ARP caching
- D. FNF
- E. IPv6
- F. SNMP
Answer: A,D,F
Explanation:
Explanation
Syslog, FNF (Flexible NetFlow), and SNMP (Simple Network Management Protocol) are three technologies that can be deployed to gather data and provide insight into the network performance, health, and behavior.
Syslog is a standard protocol for logging messages from network devices, such as routers, switches, firewalls, and servers. Syslog messages can be sent to a centralized server for analysis, correlation, and alerting. FNF is a Cisco technology that captures and exports information about network flows, such as source and destination IP addresses, ports, protocols, bytes, packets, and timestamps. FNF can be used to monitor network traffic patterns, identify anomalies, and optimize network resources. SNMP is a protocol that allows network devices to communicate with management systems, such as Cisco DNA Center. SNMP can be used to collect statistics, configuration, and status information from network devices, as well as to send commands and notifications. SNMP can help network administrators to troubleshoot, configure, and manage their network devices remotely. References: Cisco DNA Center User Guide, Release 1.3.1.0 - Monitor the Network 1, Cisco DNA Center User Guide, Release 1.3.1.0 - Configure Flexible NetFlow 2, Cisco DNA Center User Guide, Release 1.3.1.0 - Configure SNMP 3
NEW QUESTION # 38
Which are three Cisco ISE use cases? (Choose three.)
- A. Assurance
- B. Segmentation
- C. Monitoring
- D. Security Incident and Event Management
- E. Access Control
- F. BYOD
Answer: B,E,F
NEW QUESTION # 39
Which three statements are true regarding Cisco SDWAN license tiers? (Choose three.)
- A. With Plus license, split-tunnel is supported
- B. With Pro license, unlimited segmentations are supported
- C. With Enterprise license, vAnalytics is included
- D. With Plus license, Hub and spoke, partial mesh are supported
- E. With Pro license, control and data policies are supported
- F. With Enterprise license, TCP optimization is not supported
Answer: A,C,E
NEW QUESTION # 40
Which three statements best describe Cisco ISE configuration capabilities? (Choose three.)
- A. ISE requires an understanding of the command line for set-up and configuration.
- B. ISE Deployment Assistant (IDA) is a built in application designed to accelerate the deployment of Cisco Identity Service Engine (ISE)
- C. Cisco ISE includes wireless setup wizard and visibility wizard.
- D. ISE wizards and pre-canned configurations ease ISE roll-out significantly.
- E. Cisco Active Advisor provides additional guidance for ISE deployments
Answer: B,C,E
NEW QUESTION # 41
Which Cisco SD WAN component provides a secure data plane with remote vEdge routers?
- A. vBond
- B. vSmart
- C. vEdge
- D. vManage
Answer: C
NEW QUESTION # 42
Which three technologies are used in an SD-Access Fabric? (Choose three.)
- A. LISP
- B. VXLAN
- C. RSVP
- D. MPLS
- E. TrustSec
- F. OTV
Answer: A,B,E
Explanation:
Explanation
SD-Access Fabric is a network architecture that uses three key technologies to create a virtual overlay network on top of the physical underlay network. These technologies are:
VXLAN: Virtual Extensible LAN is a tunneling protocol that encapsulates Layer 2 frames in UDP packets and transports them over an IP network. VXLAN enables the creation of large-scale virtual networks that span multiple Layer 3 domains. VXLAN is used in SD-Access Fabric to carry user traffic between different fabric nodes and to provide network segmentation based on virtual network identifiers (VNIs).
TrustSec: Cisco TrustSec is a security framework that uses software-defined segmentation to enforce granular access policies based on the identity and context of users, devices, and applications. TrustSec uses scalable group tags (SGTs) to classify endpoints into logical groups and applies security policies based on the source and destination SGTs. TrustSec is integrated with SD-Access Fabric to provide micro-segmentation within a virtual network and to simplify policy management across the fabric.
LISP: Locator/ID Separation Protocol is a routing protocol that decouples the endpoint identity (EID) from its location (RLOC) in the network. LISP uses two types of devices: ingress tunnel routers (ITRs) and egress tunnel routers (ETRs) to map EIDs to RLOCs and to encapsulate and decapsulate packets.
LISP is used in SD-Access Fabric to provide control plane functions, such as endpoint registration, discovery, and mobility. LISP also enables seamless integration of SD-Access Fabric with external networks, such as the Internet, WAN, or data center.
The other options, OTV, RSVP, and MPLS, are not used in SD-Access Fabric. OTV is another tunneling protocol that extends Layer 2 connectivity across Layer 3 domains, but it is not compatible with VXLAN.
RSVP is a signaling protocol that reserves network resources for quality of service (QoS), but it is not required for SD-Access Fabric. MPLS is a packet-switching technology that labels packets and forwards them based on label switching routers (LSRs), but it is not involved in SD-Access Fabric. References := : Cisco SD-Access Solution Design Guide (CVD) - Cisco1, Cisco Software-Defined Access - Cisco Software-Defined Access Solution Overview2
NEW QUESTION # 43
How does identity management solve two customer problems? (Choose two.)
- A. Enables and enforces 802.1X across the network platform
- B. Provides network visibility and security
- C. Manages group membership
- D. Increases digitization
- E. Achieves dynamic and adaptive network segmentation
Answer: B,E
NEW QUESTION # 44
Which are three functions used by ISE automation BYOD flow? (Choose three.)
- A. Certificate Enrollment
- B. Device Registration
- C. Supplicant Provisioning
- D. BioMetrics
- E. Active Directory Group Membership
- F. LDAP Multi Tennant Provisioning
Answer: A,B,C
Explanation:
Explanation
ISE automation BYOD flow is a process that allows users to self-enroll their devices to the network without requiring IT intervention. The process consists of three main functions: certificate enrollment, device registration, and supplicant provisioning.
Certificate enrollment is the function that allows users to obtain a digital certificate from a certificate authority (CA) for their devices. This certificate is used to authenticate the device to the network and provide secure communication. ISE supports different CA options, such as Microsoft CA, Cisco ISE CA, or third-party CA .
Device registration is the function that allows users to register their devices to the network and associate them with their identity. This enables ISE to apply policies based on the device type, ownership, and posture. ISE supports different device registration methods, such as portal-based, API-based, or bulk import .
Supplicant provisioning is the function that allows users to install and configure a network access client (supplicant) on their devices. This client is used to connect to the network using the appropriate protocols and settings. ISE supports different supplicant provisioning methods, such as native supplicant, Cisco Network Setup Assistant (NSA), or Cisco AnyConnect Secure Mobility Client (AnyConnect) .
References:
[Cisco Identity Services Engine Administrator Guide, Release 2.7 - BYOD [Cisco Identity Services Engine]] :
[Cisco Identity Services Engine Administrator Guide, Release 2.7 - Certificate Provisioning [Cisco Identity Services Engine]] : [Cisco Identity Services Engine Administrator Guide, Release 2.7 - Device Registration
[Cisco Identity Services Engine]] : [Cisco Identity Services Engine Administrator Guide, Release 2.7 - Supplicant Provisioning [Cisco Identity Services Engine]]
NEW QUESTION # 45
......
Cisco 500-470 Certification Exam is a 90-minute exam consisting of 60-70 multiple-choice questions. To pass the exam, candidates must achieve a score of at least 70%. 500-470 exam is administered by Pearson VUE, and candidates can register for the exam online. Upon passing the exam, candidates will receive the Cisco Certified Network Associate (CCNA) certification, which is recognized globally as a mark of excellence in the field of networking. With this certification, professionals can demonstrate their expertise in Cisco Enterprise Networks SDA, SDWAN and ISE, and improve their career prospects in the networking industry.
Prepare Important Exam with 500-470 Exam Dumps: https://www.prep4sures.top/500-470-exam-dumps-torrent.html
Pass Exam Questions Efficiently With 500-470 Questions: https://drive.google.com/open?id=1lyY6Wq5K5AMGipPynyBmC9q-lF5Qj9tR