New 2021 1Y0-231 exam questions Welcome to download the newest Prep4sures 1Y0-231 PDF dumps (72 Q&As)
P.S. Free 2021 CCA-N 1Y0-231 dumps are available on Google Drive shared by Prep4sures
NEW QUESTION 25
Which set of items can a Citrix Administrator change when configuring a portal theme for users?
- A. Browser requirements, logo, labels
- B. Font color, labels, URL displayed
- C. Logo, background, browser requirements
- D. Logo, background, labels
Answer: D
Explanation:
Explanation/Reference:
Reference: https://support.citrix.com/article/CTX205486
NEW QUESTION 26
Which scenario will cause automatic high availability (HA) synchronization to fail?
- A. Manually forced synchronization
- B. A configuration change to the primary Citrix ADC
- C. Different build versions
- D. A forced failover
Answer: A
NEW QUESTION 27
A Citrix Administrator wants to customize the look of the landing page presented to users during the authentication process on Citrix ADC.
Which nFactor component should the administrator modify in this scenario?
- A. NoAuth Policy
- B. Logon Schema
- C. Next factor
- D. Pass-through factor
Answer: B
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/aaa-tm/authentication-methods/multi-factor- nfactor-authentication/nfactor-authentication-configuring.html
NEW QUESTION 28
Scenario: A Citrix Administrator configured a new router that requires some incoming and outgoing traffic to take different paths through it. The administrator notices that this is failing and runs a network trace. After a short monitoring period, the administrator notices that the packets are still NOT getting to the new router from the Citrix ADC.
Which mode should the administrator disable on the Citrix ADC to facilitate the successful routing of the packets?
- A. MAC-based forwarding (MBF)
- B. USIP
- C. USNIP
- D. Layer3
Answer: A
NEW QUESTION 29
Which feature can a Citrix Administrator use to create a consistent set of front-end SSL parameters across multiple SSL virtual servers?
- A. SSL bridge
- B. SSL policy
- C. SSL multiplexing
- D. SSL profile
Answer: D
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/ssl/ssl-profiles.html
NEW QUESTION 30
Scenario: Users are attempting to logon through Citrix Gateway. They successfully pass the Endpoint Analysis (EPA) scan, but are NOT able to see the client choices at logon.
What can a Citrix Administrator disable to allow users to see the client choices at logon?
- A. nFactor authentication
- B. Split tunneling
- C. Quarantine groups
- D. Client choices globally
Answer: C
NEW QUESTION 31
A Citrix Administrator needs to configure a Citrix Gateway virtual server to meet an organization's security requirements.
Which two types of devices can the administrator control with Endpoint Analysis (EPA) scans? (Choose two.)
- A. Android
- B. Chromebook
- C. Microsoft Windows
- D. iOS
- E. Mac
Answer: C,E
NEW QUESTION 32
A Citrix Administrator needs to provide access to Microsoft SharePoint through Citrix Gateway for users connecting from a web browser using the Citrix Gateway plug-in.
How can the administrator configure this?
- A. Configure Citrix Gateway in ICA proxy mode.
- B. Set clientless access to OFF.
- C. Set clientless access to ON.
- D. Enable SSL bridge mode.
Answer: A
NEW QUESTION 33
Scenario: To meet the security requirements of the organization, a Citrix Administrator needs to configure a Citrix Gateway virtual server with time-outs for user sessions triggered by the behaviors below:
* Inactivity for at least 15 minutes.
* No keyboard or mouse activity for at least 15 minutes
Which set of time-out settings can the administrator configure to meet the requirements?
- A. Client idle time-out and forced time-out set to 900
- B. Client idle time-out and forced time-out set to 15
- C. Session time-out and client idle time-out set to 15
- D. Session time-out and forced time-out set to 15
Answer: C
NEW QUESTION 34
What is a recommended practice for managing a Citrix ADC high availability (HA) pair to ensure that management changes are always made on the primary Citrix ADC?
- A. Enable management access on the Cluster IP (CLIP) address.
- B. Enable USIP on both nodes (primary and secondary).
- C. Connect to both Citrix ADCs to see which one is the primary.
- D. Enable management access to a SNIP.
Answer: D
NEW QUESTION 35
Which Citrix ADC service monitor can a Citrix Administrator use to test the three-way handshake between the Citrix ADC and the backend server?
- A. LDAP
- B. TCP
- C. PING
- D. UDP
Answer: B
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/load-balancing/load-balancing-builtin- monitors/monitor-tcp.html
NEW QUESTION 36
Scenario: A Citrix Administrator configured the policies below:
POLICY 1:
add rewrite action ACT_1 corrupt_http_header Accept-Encoding
add rewrite policy POL_1 HTTP.REQ.IS_VALID ACT_1
POLICY 2:
add rewrite action ACT_2 insert_http_header Accept-Encoding "\"identity\"" add rewrite policy POL_2 "HTTP.REQ.IS_VALID" ACT_2 Which set of commands can the administrator use to bind the rewrite policies to the LB vserver lb_vsrv so that POL_2 is evaluated after POL_1 is evaluated successfully?
- A. bind lb vserver lb_vsrv -policyName POL_1 -priority 110 -gotoPriorityExpression NEXT -type REQUEST bind lb vserver lb_vsrv -policyName POL_2 -priority 100 -gotoPriorityExpression END -type REQUEST
- B. bind lb vserver lb_vsrv -policyName POL_1 -priority 90 -gotoPriorityExpression NEXT -type REQUEST bind lb vserver lb_vsrv -policyName POL_2 -priority 100 -gotoPriorityExpression END -type REQUEST
- C. bind lb vserver lb_vsrv -policyName POL_1 -priority 90 -type REQUEST bind lb vserver lb_vsrv -policyName POL_2 -priority 100 -type REQUEST
- D. bind lb vserver lb_vsrv -policyName POL_1 -priority 90 -gotoPriorityExpression END -type REQUEST bind lb vserver lb_vsrv -policyName POL_2 -priority 80 -gotoPriorityExpression NEXT -type REQUEST
Answer: A
NEW QUESTION 37
Where do the monitor probes originate by default, after creating and correctly configuring a custom user monitor?
- A. VIP
- B. NSIP
- C. MIP
- D. SNIP
Answer: B
NEW QUESTION 38
A Citrix Administrator needs to deploy a Citrix ADC between the servers and the client, with servers only allowed to reach the client through the Citrix ADC.
In which mode should the administrator deploy the Citrix ADC?
- A. Direct server return
- B. One-arm
- C. Transparent
- D. Inline
Answer: C
NEW QUESTION 39
Scenario:A Citrix Administrator configures an access control list (ACL) to block traffic from the IP address
10.102.29.5:
add simpleacl rule1 DENY -srcIP 10.102.29.5
A week later, the administrator discovers that the ACL is no longer present on the Citrix ADC.
What could be the reason for this?
- A. The simple ACLs remain active for only 600 seconds.
- B. The Citrix ADC has been restarted without saving the configurations.
- C. The simple ACLs remain active for only 60 seconds.
- D. The administrator did NOT run the apply ACL command.
Answer: D
NEW QUESTION 40
Scenario: A Citrix Administrator needs to test a SAML authentication deployment to be used by internal users while accessing several externally hosted applications. During testing, the administrator notices that after successfully accessing any partner application, subsequent applications seem to launch without any explicit authentication request.
Which statement is true regarding the behavior described above?
- A. It is expected if the Citrix ADC appliance is the common SAML identity provider (IdP) for all partners.
- B. It indicates the SAML authentication has failed and the next available protocol was used.
- C. It is expected due to SAML authentication successfully logging on to all internal applications.
- D. It is expected if all partner organizations use a common SAML service provider (SP).
Answer: C
NEW QUESTION 41
Scenario: A Citrix Administrator made changes to a Citrix ADC, deleting parts of the configuration and saving some new ones. The changes caused an outage that needs to be resolved as quickly as possible. There is no Citrix ADC backup.
What does the administrator need to do to recover the configuration quickly?
- A. Restore from the revision history.
- B. Run saved versus running configuration.
- C. Restart the Citrix ADC.
- D. Run high availability (HA) file synchronization.
Answer: A
NEW QUESTION 42
Scenario: A Citrix Administrator configured Citrix ADC load balancing to send requests to one of three identical backend servers. Each server handles multiple protocols, and load balancing is set up in round-robin mode. The current load-balancing setup on the Citrix ADC is:
* One load-balancing virtual server with one externally accessible VIP
* One service created for each protocol type
* One server entity for each backend resource
During business hours, the administrator wants to make changes to one backend server without affecting the other servers What is the most efficient way for the administrator to ensure that all traffic is routed away from the server without impeding responses from other resources?
- A. Disable the backend server entity targeted for change.
- B. Disable the load-balancing virtual server.
- C. Disable the backend service entity targeted for change.
- D. Unbind the correct server entity from the load-balancing virtual server.
Answer: D
NEW QUESTION 43
The Citrix ADC SDX architecture allows instances to share _____________ and _____________. (Choose the two correct options to complete the sentence.)
- A. CPU
- B. physical interfaces
- C. the kernel
- D. memory
Answer: A,B
NEW QUESTION 44
Which set of items can a Citrix Administrator change when configuring a portal theme for users?
- A. Browser requirements, logo, labels
- B. Font color, labels, URL displayed
- C. Logo, background, browser requirements
- D. Logo, background, labels
Answer: D
NEW QUESTION 45
A Citrix Administrator needs to configure a Citrix Gateway virtual IP to allow incoming connections initiated exclusively from web browser sessions.
Which advanced policy will accomplish this?
- A. REQ.HTTP.HEADER User-Agent CONTAINS Chrome/78.0.3904.108 Safari/537.36
- B. REQ.HTTP.HEADER User-Agent NOTCONTAINS CitrixReceiver
- C. HTTP.REQ.HEADER("User-Agent").CONTAINS("Mozilla")
- D. HTTP.REQ.HEADER("User-Agent").CONTAINS("CitrixReceiver")
Answer: B
Explanation:
Explanation/Reference: https://stalhood2.rssing.com/chan-58610415/all_p2.html
NEW QUESTION 46
A Citrix ADC is connected with one network interface to the client network and another to the server network, ensuring that all traffic flows through the appliance.
Which type of deployment is this?
- A. Bridge mode
- B. Two-arm
- C. Direct server return
- D. One-arm
Answer: B
NEW QUESTION 47
Scenario: While performing a disaster recovery test, a Citrix Administrator decides to failover the Citrix ADC high availability (HA) pair appliances. The administrator notices that the failover is NOT working as expected, and the secondary Citrix ADC is NOT taking over as primary. The administrator suspects that networking issues may be causing the failure.
What could be the cause of this issue?
- A. The Independent Network Configuration (INC) mode is enabled on the primary node.
- B. HA monitoring is enabled on a disabled interface of the primary node.
- C. HA monitoring is enabled on an interface of the secondary node that shows as ENABLED, DOWN.
- D. HA heartbeats are only seen on some enabled interfaces of the secondary node.
Answer: C
NEW QUESTION 48
Scenario: A Citrix Administrator is configuring a new authentication, authorization, and auditing (AAA) virtual server, and the status is DOWN. The administrator makes the below configurations:
add lb vserver lb_vsrv_www HTTP 10.107.149.229 80 -persistenceType NONE -cltTimeout 180 -authn401 ON
-authnVsName SAML_SP
bind lb vserver lb_vsrv_www_ssl Red_srv
bind lb vserver Ib_vsrv_www_ssl Blue_srv
add authentication vserver SAML_SP SSL 10.107.149.230 443 -AuthenticationDomain citrix.lab What should the administrator bind to the virtual server SAML_SP to complete the installation and change the status to UP?
- A. A service
- B. An LDAP policy
- C. An SSL certificate
- D. An AAA policy
Answer: B
NEW QUESTION 49
Scenario: After deploying a Citrix ADC in production, a Citrix Administrator notices that client requests are NOT being evenly distributed among backend resources. The administrator wants to change from the default load-balancing method to one that will help distribute the load more evenly.
Which load-balancing method would ensure that the server with the least amount of network utilization is receiving new connections?
- A. Least packets
- B. Least bandwidth
- C. Least connection
- D. Least response time
Answer: B
Explanation:
Explanation/Reference: https://kb.wisc.edu/ns/page.php?id=13201#Least%20Bandwidth%20Method
NEW QUESTION 50
......
1Y0-231 exam questions from Prep4sures dumps: https://www.prep4sures.top/1Y0-231-exam-dumps-torrent.html (72 Q&As)
Free 2021 CCA-N 1Y0-231 dumps are available on Google Drive shared by Prep4sures: https://drive.google.com/open?id=1CiX6Xx5lGEPYKUdn21ba_vUQV7V6GLqC