New 2026 Latest Questions E_S4CON_2505 Dumps - Use Updated SAP Exam
Latest E_S4CON_2505 Exam Dumps SAP Exam from Training Expert Prep4sures
NEW QUESTION # 22
Which of the following SUM activities require a stack XML file calculated by the maintenance planner? Note: There are 3 correct answers to this question.
- A. Benchmark tool
- B. DMO without system update
- C. Prerequisite check
- D. SAP S/4HANA conversion without DMO
- E. SAP S/4HANA conversion including DMO
Answer: C,D,E
NEW QUESTION # 23
You are planning an SAP S/4HANA conversion.
Which conversion-specific tasks must be performed during the preparation phase?
- A. Check the compatibility of custom code with SAP S/4HANA.
- B. Run the database migration to the SAP HANA database.
- C. Solve problems from the simplification item (SI) checks.
- D. Perform the migration of data to the new data structure.
Answer: A
NEW QUESTION # 24
Which of the following are valid options to check the progress of an in place SUM DMO run? Note:
There are 2 correct answers to this question.
- A. Check logs for jobs starting with RSUPG SGEN in the SAP system.
- B. Check the log files written in the SUM directory, subdirectory a bap, subdirectory log
- C. Check the dump size of the database export in the SUM directory, subdirectory a bap, subdirectory load.
- D. Check the Charts Control Center in the SUM UL
Answer: B,D
NEW QUESTION # 25
Which step can be optimized when you provide the MIGRATE_DT_DURXML file to SUMM?
- A. Downtime migration
- B. Downtime conversion
- C. Silent data migration (SDM)
- D. Shadow on target creation
Answer: A
NEW QUESTION # 26
You have selected "Standard" as scenario strategy in the SUM tool.
Which steps take place via the shadow instance? Note: There are 2 correct answers to this question.
- A. Modification adjustment (SPAU)
- B. Activation of dictionary objects (ACT_UPG)
- C. Modification adjustment (SPDD)
- D. Conversion of application tables (PARCONV_UPG)
Answer: B,C
NEW QUESTION # 27
What is the main purpose of performing benchmark runs for an SAP S/4HANA conversion?
- A. To optimize the activation
- B. To optimize the migration
- C. To optimize the main import
- D. To optimize the conversion
Answer: B
NEW QUESTION # 28
During the upgrade of your development system, you run into the adjustment of non-dictionary objects, handled by transaction SPAAU. There you find programs that are shown in status "automatic adjustment" (green traffic light).
What will happen with these programs when you continue with your upgrade without performing any other actions inside your SAP system?
- A. Before continuing with the next phase, SUM asks for a modification adjustment transport.
- B. SUM refuses to continue unless you have marked a transport request as modification adjustment transport.
- C. SUM continues with the next phase and your modifications are kept as in the start release.
- D. SUM continues with the next phase, and the coding of your modified objects are set to the new SAP standard.
Answer: A
NEW QUESTION # 29
What do you need to consider when performing the SI checks for an SAP S/4HANA conversion? Note: There are 2 correct answers to this question.
- A. You need an SAP system based on AS ABAP 7.52 or above for the SI check framework.
- B. The Si checks are executed in the development system and the results are transported into the subsequent systems.
- C. You need to build up an SI check framework by applying SAP Notes.
- D. The errors from the SI checks must be solved; otherwise, SUM will report an error.
Answer: C,D
NEW QUESTION # 30
You are running an SAP ECC system with SAP BASIS 740, non-Unicode on SAP MaxDB. Which of the following are possible paths to perform an SAP S/4HANA conversion? Note: There are 3 correct answers to this question.
- A.
- B.
- C.
- D.
- E.
Answer: B,C,E
NEW QUESTION # 31
How does SUM recognize modification adjustment transports from predecessor systems?
- A. By searching for transport requests in file umodauto.lst
- B. By searching for transport requests that are assigned to project SAP ADJUST
- C. By searching for transport requests in DIR_TRANS, subdirectory "transport"
- D. By searching for transport requests named <sid>KO<number>
Answer: A
NEW QUESTION # 32
You are running an SAP ECC system .
For which of the following activities does SUM allow you to use the near-Zero Downtime Maintenance (nZDM) capabilities? Note: There are 3 correct answers to this question.
- A. Perform an SAP S/4HANA conversion including DMO.
- B. Upgrade the SAP system.
- C. Use DMO for SUM.
- D. Perform an SAP S/4HANA conversion without DMO.
- E. Apply SAP Support Packages.
Answer: B,C,E
NEW QUESTION # 33
You are performing an SAP S/4HANA conversion with scenario strategy Standard. Which phases are executed during SUM technical downtime? Note: There are 2 correct answers to this question.
- A. PARDIST_SHD
- B. TABIM_SHADOW_INC
- C. PARMVNT_UPG
- D. TABIM UPG
Answer: C,D
NEW QUESTION # 34
During a SUM run, you want to check if the PARCONV_UPG phase is still running property. Where can you find information about this? Note: There are 2 correct answers to this question.
- A. Check for running R3load processes on the host where SUM is running
- B. Check for running R3trans processes on the host where SUM is running
- C. Check the running batch job via Job Overview (SM37).
- D. Check the latest log files in the SUM directory, subdirectory a bap, subdirectory tmp.
Answer: C,D
NEW QUESTION # 35
You want to perform an SAP S/4HANA conversion using SUM with in place DMO.
Which steps run before the beginning of the technical downtime, irrespective of your SUM configuration? Note: There are 3 correct answers to this question.
- A. Import of dictionary objects from the download directory in phase DDIC_UPG
- B. Activation of dictionary objects in phase ACT_UPG
- C. Import of upgrade and language data from the download directory in phase TAABIM UPG
- D. Creation of application tables in the SAP HANA database in phase
- E. Generation of the new ABAAP loads in phase RUN_SGEN_GENERB
Answer: A,B,C
NEW QUESTION # 36
You are using DMO of SUM. You defined 40 parallel R3load processes during uptime and 80 parallel R3load processes during downtime. You have chosen table count verification, but not table contents comparison.
Phase EU_CLONE MIG_DT_RUN is running In the Charts Control Center, you can see 400 process buckets being executed in parallel.
Why are 40 Process Buckets executed in parallel?
- A. Without table contents comparison, only 40 R3load processes are being started.
- B. There are 40 R3load processes used for copying and 40 R3load processes for table count verification.
- C. These are 40 pairs of R3load processes, so there are 80 R3load processes running
- D. SUM is still running in uptime; the 40 defined R3load processes are considered.
Answer: C
NEW QUESTION # 37
What is the minimum SAP BASIS release of an SAP ECC system that can be converted t o an SAP S/4HANA Server 2023?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 38
......
SAP E_S4CON_2505 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
Updated Test Engine to Practice E_S4CON_2505 Dumps & Practice Exam: https://www.prep4sures.top/E_S4CON_2505-exam-dumps-torrent.html
Pass SAP E_S4CON_2505 PDF Dumps Recently Updated 42 Questions: https://drive.google.com/open?id=1nNpzGXeYhFtO_ZtCEsf9PCWseJa0qOFI