[Oct-2023] HP HPE0-S60 Dumps - Secret To Pass in First Attempt
HP HPE0-S60 Exam Dumps [2023] Practice Valid Exam Dumps Question
HP HPE0-S60 exam, also known as the Delta - HPE Compute Solutions exam, is a certification exam offered by Hewlett Packard Enterprise. HPE0-S60 exam is designed to test the knowledge and skills of IT professionals in the field of HPE compute solutions. It is intended for candidates who have already passed the HPE ATP - Server Solutions V3 or V4 certification, and who wish to upgrade their skills and knowledge to the latest HPE compute solutions.
HP HPE0-S60 (Delta - HPE Compute Solutions) certification exam is designed for IT professionals who want to validate their skills and knowledge in implementing HPE compute solutions. HPE0-S60 exam is an updated version of the HPE0-S52 exam, which was retired in April 2020. The HPE0-S60 exam is ideal for IT professionals who have experience with HPE compute solutions and want to stay up-to-date with the latest technology and solutions.
NEW QUESTION # 10
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They also plan a vSAN deployment leveraging HPE D3940 Storage Modules and SSD drives The customer requested the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- Two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- An appropriate number of vSAN Standard licenses for each compute node
- One HPE O3940 Storage Module with 40 SSDs - All required cables and options Which statement about this request is true?
- A. vSphere Standard licenses should be replaced with Enterprise Plus licenses to enable vSAN
- B. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drives.
- C. vSphere licenses should be added, as vSAN licenses do not replace vSphere licenses
- D. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM
Answer: A
NEW QUESTION # 11
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.
Answer:
Explanation:
NEW QUESTION # 12
Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView for VMware vCenter Server.
Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?
- A. Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities
- B. Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor
- C. HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality
- D. HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server
Answer: C
NEW QUESTION # 13
Match HPE Superdome Flex system with its specific feature.
Answer:
Explanation:
NEW QUESTION # 14
Which statement about the HPE D3940 storage module is true?
- A. Up to five modules can be installed in a single frame with Gen10 servers
- B. SATA drives requires redundant 10 adapters to be installed in this module
- C. Only one type of drives (SATA, SAS, SSD) can be installed in each module
- D. it is configured through CLl available from HPE Synergy console
Answer: D
NEW QUESTION # 15
You configured a vVoI datastore using HPE Storage integration Pack for VMware vCenter.
Which storage object should you check using SSMC to verify whether vVol datastore is configured property?
- A. virtual Volume
- B. App Volume Set
- C. Virtual Volume Set
- D. Storage Container
Answer: C
NEW QUESTION # 16
Your customer has experience with utilization sampling for HPE Virtual Connect SE 100 Gb F32 Module for HPE Synergy. They have recently purchased HPE VC FC modules.
What must you be aware of regarding utilization sampling for the new modules?
- A. For HPE VC FC modules, utilization sampling can be enabled once appropriate license is applied
- B. Utilization sampling works the same way tor any type of HPE Synergy interconnect modules
- C. Utilization sampling for HPE VC FC modules must be enabled manually using CLI.
- D. For HPE VC FC modules, utilization sampling is always enabled and cannot be disabled
Answer: C
NEW QUESTION # 17
Your customer plans to use HPE Primera to boot HPE Synergy compute nodes. They currently have two HPE Virtual Connect SE 100Gb F32 Module for Synergy modules installed in the frame. The customer wants to use FC as a storage access protocol What must be done to complete this task?
- A. Enter both modules into a maintenance mode, then enable FC connectivity through CLI
- B. FC connectivity on the modules should be enabled through the service console by disabling FCoE.
- C. Enable FC primary and secondary boot on the modules through the HPE OneView interface
- D. Add FC upgrade licenses in HPE OneView that will enable FC connectivity for the modules
Answer: B
NEW QUESTION # 18
You need to configure a RoCE network to enable lossless networking for HPE J2000 Flash Enclosure support Which interconnects are required to support this connection? (Select two.)
- A. HPE Virtual Connect SE 32Gb FC Module for HPE Synergy
- B. HPE Virtual Connect SE 16Gb FC Module for HPE Synergy
- C. HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy
- D. Brocade 16Gb Fibfe Channel SAN Switch Module for HPE Synergy
- E. HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy
- F. Brocade 32Gb Fibre Channel SAN Switch Module for HPE Synergy
Answer: A,B
NEW QUESTION # 19
After deploying HPE Superdome Flex 280 you need to check Core Analysis Engine (CAE) Log.
Click the appropriate section in the HPE Superdome Flex 280 management interface that will allow you to complete this task.
Answer:
Explanation:
NEW QUESTION # 20
What is a restriction of using a RoCE network?
- A. It does not support Private VLAN and Multicast VLAN.
- B. it is not supported with HPE Virtual Connect SE 40 GD F8 Module for HPE Synergy.
- C. It is by default configured as an untagged network and cannot be a part of a network set.
- D. It does not support smart link and private network features.
Answer: C
NEW QUESTION # 21
Your customer has an HPE Synergy platform deployed and managed using HPE OneView. The customer also has HPE Superdome Flex with RMC deployed They plan to deploy a second nPar and HPE Superdome Flex
280 They plan to manage new components using HPE OneView
What must be done to achieve this goal?
- A. The customer has to add HPE Superdome Flex to the HPE OneView used to manage HPE Synergy
- B. The customer must use IL05 to add HPE Superdome Flex systems to HPE OneView
- C. The customer should deploy an HPE OneView appliance for HPE Superdome Flex management
- D. The customer must add a second Rack Management Controller for HPE Superdome Flex 280
Answer: D
NEW QUESTION # 22
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. For the given downlink speed, the maximum number of frames is reached
- B. The master modules are located in the interconnect bays 2 and 5
- C. Both master modules are located in the same HPE S ynergy frame
- D. To use interconnect bay set 3, all compute nodes must be half-height
Answer: C
NEW QUESTION # 23
Your customer plans to deploy VMware ESXi 7. 0 U2, and they are looking for a hardware platform that will allow them to use up to 16 CPU sockets Which HPE compute system meets the customer requirements?
- A. HPE Superdome Flex system
- B. HPE ProLiant DL580 Gen10
- C. HPE ProLiant OL380 Gen 10 Plus
- D. HPE Synergy 480 Gen10 Plus
Answer: D
NEW QUESTION # 24
In the past a customer experienced a networking issue where network ports went down and came back up in quick succession.
Which HPE Virtual Connect SE 100 GD F32 Module for HPE Synergy feature can be configured to disable such ports?
- A. Port flap protection
- B. Pause flood protection
- C. sFlow
- D. Storm control
Answer: C
NEW QUESTION # 25
Match each HPE OneView network type with its definition.
Answer:
Explanation:
NEW QUESTION # 26
Which statement about a new HPE SimpliVity deployment is true?
- A. New HPE SimpliVity deployments gives customer flexible choice of hypervisor
- B. All new HPE SimpliVity models are based on mid CPUs
- C. A new HPE SimpliVity node can be a member of multiple dusters
- D. AM new HPE SimpliVity models are software optimized
Answer: A
NEW QUESTION # 27
Your customer is trying to grow a VMware duster using HPE OneView for VMware vCenter Server. They get an error and cannot proceed Which tool should you use to troubleshoot the problem?
- A. vCenter Server to verify if an OS Bund Plans property defined and has ESXi image uploaded
- B. HPE One View for VMware vCenter Server to verify if server profile template s property imported and registered
- C. ILO interlace of a given HPE Synergy compute node to verify whether this node is registered within HPE Oneview.
- D. HPE OneView interface to import an existing cluster using the hypervisor cluster profile functionality.
Answer: B
NEW QUESTION # 28
Match HPE SimpliVity team with the definition.
Answer:
Explanation:
NEW QUESTION # 29
Your customer is implementing an HPE Synergy solution based on three frames.
Click each of the ports that can be used to connect satellite modules.
Answer:
Explanation:
NEW QUESTION # 30
You need to setup HPE Synergy frames after hardware components are discovered within HPE OneView.
Put the steps to achieve this goal into the coned order in the answer area on the right.
Answer:
Explanation:
NEW QUESTION # 31
Match HPE SimpliVity term with the definition.
Answer:
Explanation:
NEW QUESTION # 32
Your customer has the following HPE Synergy setup
- 3 HPE Synergy 12000 Frames
- 4 HPE Virtual Connect SE 100 Gb F32 Modules
- 2 HPE Synergy 50 GO Interconnect Link Modules
- 36 HPE Synergy 480 Gen10 Plus compute modules
- 2 HPE Composer 2 modules
Which statement about this setup is true?
- A. The customer can add one D3940 storage Module to each of the frames
- B. The customer must buy 36 HPE OneView Advanced licenses to manage compute modules
- C. To use all compute nodes, the customer must create at least two logical enclosures
- D. To manage all frames, the customer must buy two additional HPE Composer 2 modules
Answer: B
NEW QUESTION # 33
......
HPE0-S60 Exam Dumps PDF Guaranteed Success with Accurate & Updated Questions: https://www.prep4sures.top/HPE0-S60-exam-dumps-torrent.html
HPE0-S60 Dumps - Grab Out For [NEW-2023] HP Exam: https://drive.google.com/open?id=1mF6Msk9xx1cnayYO9l93epkTWA8k_E9R