Real D-VXR-OE-23 are Uploaded by Prep4sures provide 2024 Latest D-VXR-OE-23 Practice Tests Dumps.
All D-VXR-OE-23 Dumps and Dell VxRail Operate 2023 Training Courses Help candidates to study and pass the Dell VxRail Operate 2023 Exams hassle-free!
NEW QUESTION # 27
SIMULATION
After the initial setup, a customer requested the administrator use active-active teaming and failover order for the vSAN and vMotion port groups. The customer currently has two uplinks and one distributed switch. Without accessing any hosts, use the simulator to remediate the configuration.
Answer:
Explanation:
See the step by step solution in the Explanation below
Explanation:
To configure active-active teaming and set the failover order for the vSAN and vMotion port groups on a distributed switch using the vSphere Client, follow these steps:
Log in to vSphere Client:
Open the vSphere Client.
Enter the username: [email protected].
Enter the password: VMw@r3!123.
Click Login.
Navigate to Networking:
From the home screen, click on Networking in the left-hand navigation pane.
Select the Distributed Switch:
Locate and select the distributed switch that the vSAN and vMotion port groups are using.
Edit vSAN Port Group Settings:
Right-click on the vSAN port group and select Edit Settings.
In the Edit Settings window, click on Teaming and Failover.
Configure Active-Active Teaming for vSAN:
In the Teaming and Failover section, you will see the list of uplinks.
Ensure that both uplinks are set as Active Uplinks.
To do this, drag the uplinks from the Unused Uplinks or Standby Uplinks section to the Active Uplinks section if necessary.
Ensure that no uplinks are in the Standby Uplinks section (all should be in Active Uplinks).
Set Failover Order for vSAN:
Ensure the failover order is correctly set to use both uplinks for active-active teaming.
Click OK to save the changes.
Edit vMotion Port Group Settings:
Right-click on the vMotion port group and select Edit Settings.
In the Edit Settings window, click on Teaming and Failover.
Configure Active-Active Teaming for vMotion:
In the Teaming and Failover section, ensure that both uplinks are set as Active Uplinks.
Drag the uplinks from the Unused Uplinks or Standby Uplinks section to the Active Uplinks section if necessary.
Ensure that no uplinks are in the Standby Uplinks section (all should be in Active Uplinks).
Set Failover Order for vMotion:
Ensure the failover order is correctly set to use both uplinks for active-active teaming.
Click OK to save the changes.
Verify Configuration:
Check the Networking section to verify that the changes have been applied correctly and that both port groups are using active-active teaming with the appropriate failover order.
Reference:
VMware vSphere Networking Guide: vSphere Networking
These steps outline the process to configure active-active teaming and set the failover order for the vSAN and vMotion port groups without accessing any hosts directly. This ensures redundancy and efficient use of available network resources.
NEW QUESTION # 28
How is the VMware HCIA Management role associated with a user in vCenter after the VxRail system has been deployed?
- A. Add user to HCIA Management group
- B. User is automatically added to the role when created
- C. Import the role to the user from VxRail Manager
- D. Assign the role directly to the user at the object level
Answer: D
NEW QUESTION # 29
Task
An administrator is working with the VxRail Dell Support team and as part of the troubleshooting, the admin has been instructed to temporarily remove the node with a serial number of "V0730040000000" from the cluster.
User credentials are Username of
"[email protected]"
Password "VMw@r3!123".
Using the simulator, identify the correct node and remove it from the cluster.
Answer:
Explanation:
To temporarily remove a node with a specific serial number from the VxRail cluster, follow these steps:
* Log in to vSphere Client:
* Open the vSphere Client.
* Enter the username:[email protected].
* Enter the password:VMw@r3!123.
* ClickLogin.
* Identify the Node with Serial Number "V0730040000000":
* In the vSphere Client interface, navigate to theHosts and Clustersview.
* Expand theVxRail-DCand then theVxRail-Cluster.
* Locate the Node:
* Click on each host
(e.g.,vcluster730-esx01,vcluster730-esx02,vcluster730-esx03,vcluster730-esx04) and check the Summary tab to identify the node with the serial numberV0730040000000.
* The Summary tab provides details about the hardware, including the serial number.
* Put the Node in Maintenance Mode:
* Right-click on the identified node.
* SelectMaintenance Mode>Enter Maintenance Mode.
* SelectEnsure Accessibilityand clickOK.
* Remove the Node from the Cluster:
* Once the node is in maintenance mode, right-click the node again.
* SelectRemove from Inventory.
* Confirm the action by clickingYesorOKwhen prompted.
* Verify the Node Removal:
* Ensure that the node is no longer listed under theVxRail-Cluster.
* Check the overall health and status of the cluster to confirm that it is functioning properly without the removed node.
Reference:
Dell VxRail Administration Guide: VxRail Administration Guide
=========================
Note: Be cautious when removing nodes from a VxRail cluster, as this can impact the cluster's capacity and redundancy. Always follow proper procedures and consult with Dell Support as needed.
NEW QUESTION # 30
A customer requires an All-Flash system, with compression and deduplication, RAID-5/6 capability, and Data at Rest Encryption.
Which vSAN license level should be recommended?
- A. Enterprise
- B. Standard
- C. Enterprise Plus
- D. Advanced
Answer: A
NEW QUESTION # 31
Which VxRail deployment model is recommended in environments that prohibit the use of a corporate DNS server?
- A. External vCenter with internal DNS
- B. Internal vCenter with internal DNS
- C. Internal vCenter with external DNS
- D. External vCenter with external DNS
Answer: B
NEW QUESTION # 32
At what object level is vSAN deduplication and compression enabled for a VxRail system?
- A. Disk group
- B. Virtual machine
- C. Datacenter
- D. Cluster
Answer: D
NEW QUESTION # 33
What is a consideration when planning for node expansion of an existing 4-node All-Flash Dell EMC VxRail 4.5.2xx cluster?
- A. Expansion procedure is performed by Dell EMC or a Dell EMC partner
- B. vSphere Web Client is used to perform the expansion procedure
- C. New nodes must be identical to the existing nodes
- D. New nodes can be hybrid or All-Flash
Answer: C
NEW QUESTION # 34
A VxRail administrator is evaluating vSAN settings in preparation for vSAN configuration.
Which configurations will result in the lowest initial usable capacity?
- A. FTT = 1 (RAID 1 - Mirroring) Deduplication and Compression Enabled
- B. FTT = 1 (RAID 5 - Erasure Coding) Deduplication and Compression Enabled
- C. FTT = 1 (RAID 1 - Mirroring) Deduplication and Compression Disabled
- D. FTT = 1 (RAID 5 - Erasure Coding) Deduplication and Compression Disabled
Answer: B
NEW QUESTION # 35
VxRail Health Monitoring should be disabled when which action is performed?
- A. Replacing a Node
- B. Changing a Group Policy
- C. Creating a Storage Policy
- D. Adding Users
Answer: A
NEW QUESTION # 36
A VxRail administrator has been informed by Dell EMC that an Internet software upgrade is available for their VxRail cluster. The administrator logs into VxRail Manager. VxRail Manager shows only the Local Upgrade option and not the Internet Upgrade option.
What is a possible reason?
- A. VxRail Manager VM does not have Internet connectivity
- B. Workstation accessing VxRail Manager does not have Internet connectivity
- C. Secure Remote Services has not been enabled
- D. The VxRail Manager user has insufficient privileges
Answer: A
NEW QUESTION # 37
Which VxRail model series supports only hybrid disks?
- A. E Series
- B. P Series
- C. S Series
- D. G Series
Answer: D
NEW QUESTION # 38
What is the minimum number of nodes required to build a VxRail 4.5 cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 39
What is the failure domain when vSAN Compression is enabled?
- A. Disk
- B. Cluster
- C. Host
- D. Disk Group
Answer: A
NEW QUESTION # 40
A VxRail has been configured with the VxRail-deployed vCenter Server option.
Which service VMs can be optionally hosted on the VxRail cluster?
- A. VxRail Manager and Secure Remote Services/VE
- B. vRealize Log Insight and Secure Remote Services/VE
- C. vCenter Server, Platform Services Controller, and Secure Remote Services/VE
- D. VxRail Manager, vCenter Server, and Platform Services Controller
Answer: B
NEW QUESTION # 41
While creating a new VM on a vSAN datastore, an administrator did not assign a storage policy.
What is the result?
- A. VM will be created with RAID-1 (FTT=2)
- B. VM will be created with Force Provisioning only
- C. VM will be created with FTT=0
- D. VM will be created with the vSAN Default Storage Policy
Answer: D
NEW QUESTION # 42
The vSphere Client is showing several failures on node 3. Support recommends opening an SSH session to troubleshoot. The connection fails to establish.
Which path should be used to enable SSH on the host from vSphere Client?
- A. Host > Configure > System > Services
- B. Cluster > Configure > VxRail > Hosts > Enable SSH
- C. Host > Configure > VxRail > Enable SSH
- D. Cluster > Monitor > System > Services
Answer: A
NEW QUESTION # 43
SIMULATION
Task
An administrator is working with the VxRail Dell Support team and as part of the troubleshooting, the admin has been instructed to temporarily remove the node with a serial number of "V0730040000000" from the cluster.
User credentials are Username of
"[email protected]"
Password "VMw@r3!123".
Using the simulator, identify the correct node and remove it from the cluster.
Answer:
Explanation:
See the step by step solution in the Explanation below
Explanation:
To temporarily remove a node with a specific serial number from the VxRail cluster, follow these steps:
Log in to vSphere Client:
Open the vSphere Client.
Enter the username: [email protected].
Enter the password: VMw@r3!123.
Click Login.
Identify the Node with Serial Number "V0730040000000":
In the vSphere Client interface, navigate to the Hosts and Clusters view.
Expand the VxRail-DC and then the VxRail-Cluster.
Locate the Node:
Click on each host (e.g., vcluster730-esx01, vcluster730-esx02, vcluster730-esx03, vcluster730-esx04) and check the Summary tab to identify the node with the serial number V0730040000000.
The Summary tab provides details about the hardware, including the serial number.
Put the Node in Maintenance Mode:
Right-click on the identified node.
Select Maintenance Mode > Enter Maintenance Mode.
Select Ensure Accessibility and click OK.
Remove the Node from the Cluster:
Once the node is in maintenance mode, right-click the node again.
Select Remove from Inventory.
Confirm the action by clicking Yes or OK when prompted.
Verify the Node Removal:
Ensure that the node is no longer listed under the VxRail-Cluster.
Check the overall health and status of the cluster to confirm that it is functioning properly without the removed node.
Reference:
Dell VxRail Administration Guide: VxRail Administration Guide
Note: Be cautious when removing nodes from a VxRail cluster, as this can impact the cluster's capacity and redundancy. Always follow proper procedures and consult with Dell Support as needed.
NEW QUESTION # 44
......
EMC D-VXR-OE-23 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
Valid Way To Pass EMC's D-VXR-OE-23 Exam with : https://www.prep4sures.top/D-VXR-OE-23-exam-dumps-torrent.html
Free Test Engine For Dell VxRail Operate 2023 Certification Exams: https://drive.google.com/open?id=1FK3LmbGdG4p5UhRFoXLP42rdTocdq7YH