Sep-2026 Realistic 300-710 Exam Dumps with Accurate & Updated Questions
300-710 Exam Dumps - PDF Questions and Testing Engine
Who should take the Securing Networks with Cisco Firepower (300-710 SNCF) Exam
People who wish to explore the power of the dynamic culture of the Cisco Learning Network to jump-start their certification and lifelong learning goals should take this exam. Those who want to get useful tools for IT training for all Cisco certifications should also get this certification. People with prior knowledge of Cisco Firepower Threat Defence, including policy configurations, integrations, deployments, management and troubleshooting, are highly recommended to take this exam and get themselves certified from Cisco.
List of target audience for this exam:
- Technical support personnel
- Security administrators
- Cisco integrators and partners
To pass the Cisco 300-710 exam, candidates need to have a solid understanding of network security concepts and experience in configuring and troubleshooting Cisco Firepower appliances. 300-710 exam consists of 60-70 multiple-choice questions and has a time limit of 90 minutes. The passing score for the exam is 750 out of 1000.
NEW QUESTION # 57
Refer to the exhibit.
A systems administrator conducts a connectivity test to their SCCM server from a host machine and gets no response from the server. Which action ensures that the ping packets reach the destination and that the host receives replies?
- A. Modify the Snort rules to allow ICMP traffic.
- B. Configure a custom Snort signature to allow ICMP traffic after Inspection.
- C. Create an ICMP allow list and add the ICMP destination to remove it from the implicit deny list.
- D. Create an access control policy rule that allows ICMP traffic.
Answer: D
NEW QUESTION # 58
When using Cisco AMP for Networks, which feature copies a file to the Cisco AMP cloud for analysis?
- A. malware analysis
- B. Spero analysis
- C. dynamic analysis
- D. sandbox analysis
Answer: C
NEW QUESTION # 59 
Refer to the exhibit. An engineer must configure a connection on a Cisco ASA Firewall with a Cisco Secure Firewall Services Module to ensure that the secondary interface takes over all the functions of the primary interface if the primary interface fails. Drag and drop the code snippets from the bottom onto the boxes in the CLI commands to configure the failover. Not all options are used.
Answer:
Explanation:
Explanation:
A screenshot of a computer AI-generated content may be incorrect.
NEW QUESTION # 60 
Refer to the exhibit An engineer is modifying an access control pokey to add a rule to inspect all DNS traffic that passes through the firewall After making the change and deploying thepokey they see that DNS traffic is not bang inspected by the Snort engine What is the problem?
- A. The rule must define the source network for inspection as well as the port
- B. The rule is configured with the wrong setting for the source port
- C. The action of the rule is set to trust instead of allow.
- D. The rule must specify the security zone that originates the traffic
Answer: C
NEW QUESTION # 61
A network engineer must configure an existing firewall to have a NAT configuration. The now configuration must support more than two interlaces per context. The firewall has previously boon operating transparent mode. The Cisco Secure Firewall Throat Defense (FTD) device has been deregistered from Cisco Secure Firewall Management Center (FMC). Which set of configuration actions must the network engineer take next to meet the requirements?
- A. Run the configure firewall routed command from the Secure FMC CLI. and reregister with Secure FMC.
- B. Run the configure firewall routed command from the Secure FTD device CD, and reregister with Secure FMC.
- C. Run the configure manager add routed command from the Secure FTD device CL1, and reregister with Secure FMC.
- D. Run the configure manager add routed command from the Secure FMC CLI. and reregister with Secure FMC.
Answer: B
Explanation:
To support more than two interfaces per context and enable NAT configurations, the firewall must operate in routed mode. Since the firewall was previously in transparent mode, the network engineer needs to change it to routed mode.
Steps:
* Access the CLI of the Secure FTD device.
* Run the command configure firewall routed to switch the firewall from transparent mode to routed mode.
* Reregister the FTD device with the FMC by running the configure manager add <FMC_IP>
<Registration_Key> command from the FTD device CLI.
This will ensure that the firewall can support the required NAT configurations and more than two interfaces per context.
References: Cisco Secure Firewall Management Center Device Configuration Guide, Chapter on Routed Mode Configuration.
NEW QUESTION # 62
Due to an Increase in malicious events, a security engineer must generate a threat report to include intrusion in events, malware events, and security intelligence events. How Is this information collected in a single report?
- A. Create a Custom report.
- B. Export the Attacks Risk report.
- C. Run the default Firepower report.
- D. Generate a malware report.
Answer: A
NEW QUESTION # 63 
Refer to the exhibit. Users attempt to connect to numerous external resources on various TCP ports. If the users mistype the port, their connection closes immediately, and it takes more than one minute before the connection is torn down. An engineer manages to capture both types of connections as shown in the exhibit.
What must the engineer configure to lower the timeout values for the second group of connections and resolve the user issues?
- A. Outbound access rule with the Block with reset action
- B. Inbound access rule that allows TCP reset packets from outside
- C. Outbound access rule that allows the entire ICMP protocol suite
Answer: B
NEW QUESTION # 64
An organization wants to secure traffic from their branch office to the headquarter building using Cisco Firepower devices, They want to ensure that their Cisco Firepower devices are not wasting resources on inspecting the VPN traffic. What must be done to meet these requirements?
- A. Configure the Cisco Firepower devices to ignore the VPN traffic using prefilter policies
- B. Configure the Cisco Firepower devices to bypass the access control policies for VPN traffic.
- C. Enable a flexconfig policy to re-classify VPN traffic so that it no longer appears as interesting traffic
- D. Tune the intrusion policies in order to allow the VPN traffic through without inspection
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/fdm/fptd-fdm-config-guide-640/fptd- fdm-ravpn.html
NEW QUESTION # 65
An engineer must configure an inline set on a Cisco Secure IPS by using the Cisco Secure Firewall Management Center. The inline set must make a copy of each packet before analyzing the packet and block any connections that do not complete the three-way handshake. These configurations have been performed already:
- Select and enable the interfaces that will be added to the inline
set.
- Configure the speed and duplex.
- Configure the inline set and add the interfaces to the inline set.
Which action completes the task?
- A. Implement Strict TCP Enforcement.
- B. Configure Link State Propagation.
- C. Set Tap Mode to Inline.
- D. Configure Snort Fail Open.
Answer: A
Explanation:
The scenario describes a need for blocking any connections that do not complete the three-way handshake. This behavior is associated with TCP session validation - ensuring that only legitimate sessions (with completed handshakes) are allowed.
Implement Strict TCP Enforcement - This feature ensures that only fully established TCP sessions (with a proper 3-way handshake) are allowed, and sessions that fail to complete the handshake are blocked.
NEW QUESTION # 66
An engineer must define a URL object on Cisco FMC. What is the correct method to specify the URL without performing SSL inspection?
- A. Specify all subdomains in the object group.
- B. Include all URLs from CRL Distribution Points.
- C. Use Subject Common Name value.
- D. Specify the protocol in the object.
Answer: A
NEW QUESTION # 67
An organization has a Cisco IPS running in inline mode and is inspecting traffic for malicious activity. When traffic is received by the Cisco IRS, if it is not dropped, how does the traffic get to its destination?
- A. It is retransmitted from the Cisco IPS inline set.
- B. The packets are duplicated and a copy is sent to the destination.
- C. It is transmitted out of the Cisco IPS outside interface.
- D. It is routed back to the Cisco ASA interfaces for transmission.
Answer: D
NEW QUESTION # 68
Refer to the exhibit. An engineer is configuring a high-availability solution that has the hardware devices and software versions:
- two Cisco Secure Firewall 9300 Security Appliances with FXOS SW
2.0(1.23)
- one Cisco Secure Firewall Threat Defense with 6.0 1 1 (build 1023)
- one Cisco Secure Firewall Management Center with SW 6 0.1.1 (build
1023)
Which condition must be met to complete the high-availability configuration?
- A. Both firewalls must be in transparent mode
- B. The version numbers must have the same patch number
- C. Both firewalls must have the same number of interfaces
- D. DHCP must be configured on at least one firewall interface.
Answer: C
Explanation:
In a high-availability (HA) setup for Cisco Secure Firewall devices, both firewalls in the HA pair must have identical configurations, which includes having the same number of interfaces with matching names, IP addresses, and settings. This requirement ensures that both devices can function seamlessly as primary and secondary units, allowing for smooth failover without configuration mismatches.
For HA to work properly, each firewall must have the same interface configuration to ensure that both units can handle traffic in the same way when a failover event occurs. If the primary device fails, the secondary device needs to have identical interface configurations to take over immediately.
NEW QUESTION # 69
What is a valid Cisco AMP file disposition?
- A. known-good
- B. non-malicious
- C. malware
- D. pristine
Answer: C
Explanation:
Disposition: malware, clean or unknown
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/configuration/guide/fpmc-config- guide-v623/file_malware_events_and_network_file_trajectory.html
NEW QUESTION # 70
A network engineer is extending a user segment through an FTD device for traffic inspection without creating another IP subnet. How is this accomplished on an FTD device in routed mode?
- A. by leveraging the ARP to direct traffic through the firewall
- B. by assigning an inline set interface
- C. by bypassing protocol inspection by leveraging pre-filter rules
- D. by using a BVI and creating a BVI IP address in the same subnet as the user segment
Answer: B
Explanation:
Section: Deployment
NEW QUESTION # 71
Which two routing options are valid with Cisco Firepower Threat Defense? (Choose two.)
- A. BGPv6
- B. ECMP with up to three equal cost paths across a single interface
- C. ECMP with up to three equal cost paths across multiple interfaces
- D. BGPv4 in transparent firewall mode
- E. BGPv4 with nonstop forwarding
Answer: A,B
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/601/configuration/guide/fpmc-config- guide-v601/fpmc-config-guide-v60_chapter_01100011.html
NEW QUESTION # 72
An engineer is configuring a Cisco Secure Firewall Threat Defense device managed by Cisco Secure Firewall Management Center. The device must have SSH enabled and be accessible from the inside interface for remote administration. Which type of policy must the engineer configure to accomplish this?
- A. identity
- B. platform settings
- C. access control
- D. prefilter
Answer: B
Explanation:
To enable SSH access to a Cisco Secure Firewall Threat Defense (FTD) device from the inside interface for remote administration, the engineer needs to configure a Platform Settings policy in Cisco Secure Firewall Management Center (FMC). The Platform Settings policy allows the configuration of various system-related settings, including enabling SSH, specifying the allowed interfaces, and defining the SSH access parameters.
Steps:
In FMC, navigate to Policies > Access Control > Platform Settings. Create a new Platform Settings policy or edit an existing one.
In the policy settings, go to the SSH section.
Enable SSH and specify the inside interface as the allowed interface for SSH access. Define the SSH parameters such as allowed IP addresses, user credentials, and other security settings.
Save and deploy the policy to the FTD device.
This configuration ensures that SSH access is enabled on the specified interface, allowing secure remote administration.
NEW QUESTION # 73
An engineer must reconfigure an NTP server on an IPSv device that is managed by using Cisco Secure Firewall Management Center. The engineer verified secure communications between Secure Firewall Management Center and the NTP server. How must the engineer perform the reconfiguration in Secure Firewall Management Center?
- A. Devices > Device Management > Time Synchronization
- B. Devices > Device Management > [NGIPSv device] > Device > System
- C. Devices > Platform Settings > [assigned Secure Firewall Settings Policy] > Classic managed devices
- D. Devices > Platform Settings > [assigned Threat Defense Settings Policy] > Time Synchronization
Answer: D
Explanation:
To reconfigure an NTP server for an IPSv device managed via Cisco Secure Firewall Management Center (FMC), the engineer must modify the Platform Settings Policy assigned to the device. In this case, the Threat Defense Settings Policy under Platform Settings contains the configuration for Time Synchronization (NTP).
From this section, the engineer can add, modify, or remove NTP servers used by the managed device. After the changes are made, the updated policy is deployed to the device to take effect.
NEW QUESTION # 74
......
Cisco 300-710 (Securing Networks with Cisco Firepower) certification exam is designed to test the knowledge and skills of network security professionals who use Cisco Firepower Next-Generation Firewall (NGFW), web security, and email security appliances. 300-710 exam focuses on the deployment, configuration, and management of Cisco Firepower NGFW, including its integration with other Cisco security solutions. Securing Networks with Cisco Firepower certification is intended for security engineers, network designers, and administrators who want to enhance their knowledge and skills in network security.
Pass Cisco 300-710 Exam Quickly With Prep4sures: https://www.prep4sures.top/300-710-exam-dumps-torrent.html
300-710 Dumps - The Sure Way To Pass Exam: https://drive.google.com/open?id=1ePD9I5UzVbzKedT-p9lJ50-Odh4aJK8i