[Sep 29, 2021] Updates Up to 365 days On Valid NS0-183 Braindumps
Best QualityNS0-183 Exam Questions Network Appliance Test To Gain Brilliante Result
NEW QUESTION 38
Click the Exhibit button.
A customer has a 2-node FAS8200 cluster with four DS212C shelves with 10 TB SATA drives.
Referring to the exhibit, an aggregate will be created with which default RAID type?
- A. RAID_TEC
- B. RAID_DP
- C. RAID1
- D. RAID4
Answer: A
NEW QUESTION 39
You install a new FAS2650 HA with a DS224C disk shelf and ONTAP 9.5 on a customer site.
Referring to the exhibit, which steps are required to get an HA cabled system?
- A. 1. Insert a cable from right controller port 0a to IOMB port 2, and from port 0b to IOMA port 4. 2. Insert a cable from left controller port 0a to IOMA port 2, and from port 0b to IOMB port 4. 3. Cable the out-of-band ACP.
- B. 1. Insert a cable from right controller port 0a to IOMA port 1, and from port 0b to IOMB port 3. 2. Insert a cable from left controller port 0a to IOMB port 1, and from port 0b to IOMA port 3.
- C. 1. Insert a cable from right controller port 0a to IOMB port 2, and from port 0b to IOMA port 3. 2. Insert a cable from left controller port 0a to IOMA port 2, and from port 0b to IOMB port 3.
- D. 1. Insert a cable from right controller port 0a to IOMB port 1, and from port 0b to IOMA port 4. 2. Insert a cable from left controller port 0a to IOMA port 1, and from port 0b to IOMB port 4. 3. Cable the out-of-band ACP.
Answer: B
NEW QUESTION 40
A customer has a 6-node AFF A700 cluster and wants to add four nodes without having to update license functionality for each node manually. In this scenario, which type of license provides this functionality?
- A. Standard License
- B. Site License
- C. Evaluation License
- D. Demo License
Answer: B
NEW QUESTION 41
When you install a new ONTAP 9.7 4-node cluster, which network type is required?
- A. cluster interconnect
- B. intercluster network
- C. peering network
- D. data network
Answer: A
NEW QUESTION 42
What should you do to change the data protocol of a LIF?
- A. Add the new data protocol to the LIF.
- B. Shut down the assigned port.
- C. Delete and re-recreate the LIF.
- D. Put the LIF in another broadcast domain.
Answer: C
NEW QUESTION 43
Which keyboard combination enables you to access the Service Processor (SP) or the Board Management Control (BMC) from the system console CLI?
- A. Ctrl + S
- B. Ctrl + G
- C. Ctrl + D
- D. Ctrl + C
Answer: B
NEW QUESTION 44
After an initial setup, you want to create a new data aggregate. The node has thirty-one 4 TB SATA spare disks assigned. Your customer wants to have two spare disks.
In this scenario, which two settings would you use to reach the maximum capacity and availability? (Choose two.)
- A. -raidtype raid_dp
- B. -maxraidsize 31
- C. -raidtype raid_tec
- D. -maxraidsize 29
Answer: C,D
NEW QUESTION 45
Click the Exhibit button.
You are installing a new FAS cluster. The management network must be on tagged VLAN 11 for remote administration by a service provider.
Referring to the exhibit, which two ports will allow service provider access to both cluster and node management LIFs? (Choose two.)
- A. e0M
- B. e0M-11
- C. e0a-11
- D. e0b-11
Answer: A,B
NEW QUESTION 46
In ONTAP 9.7 software, how many different replicated databases (RDBs) exist per node?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 47
You are adding new controllers to an existing cluster. As part of the upgrade process, you have updated the BES-53248 cluster switches.
In this scenario. Which two commands would you use to verify a healthy cluster after the upgrade? (Choose two.)
- A. network port show -ipspace Cluster
- B. network interface show -vserver Cluster -fields auto-revert
- C. network interface show -vserver Cluster
- D. network device-discovery show -protocol cdp
Answer: A,C
NEW QUESTION 48
You must cable a new AFF A700 with two DS224C shelves that are fully populated with 15.3 TB SSDs. You want to ensure that the maximum bandwidth between the disks and the controllers is reached.
In this scenario, according to NetApp best practices, which type of cabling should you use?
- A. single-path HA
- B. direct connected HA
- C. quad-path HA
- D. multipath HA
Answer: C
NEW QUESTION 49
Click the Exhibit button.
A customer has a 2-node FAS8200 cluster with four DS212C shelves with 10 TB SATA drives.
Referring to the exhibit, an aggregate will be created with which default RAID type?
- A. RAID_TEC
- B. RAID_DP
- C. RAID1
- D. RAID4
Answer: A
NEW QUESTION 50
You installed a new pair of Cisco 92300YC cluster switches at a customer's site. Before you install any files on the switch, you want to view the current configuration.
In this scenario, which command would you use to accomplish this task?
- A. fabricshow
- B. switchcfgshow
- C. config show
- D. show running-config
Answer: B
NEW QUESTION 51
After you install a new cluster with ONTAP 9.5 software, you want to create a new broadcast domain. During the creation of the broadcast domain, you receive an error that there are no free ports available.
What is the reason for this error message?
- A. By Default, all ports are bound to the "Default" broadcast domain. To create a new port, remove the needed ports from the "Default" broadcast domain and create a new IPspace.
- B. Before you configure a new broadcast domain, you should create a new IPspace.
- C. You can create a new broadcast domain only within the CLI.
- D. By Default, all ports are bound to the "Default" broadcast domain. To create a new port, remove the needed ports from the "Default" broadcast domain.
Answer: D
NEW QUESTION 52
Node 3 has taken over Node 4. You are attempting to access Node 4 on its management interface but cannot do it. In this scenario, how would you access Node 4's management interface?
- A. You must use the Service Processor; node management LIFS do not fall over between nodes.
- B. You should use SSH directly to one of the cluster interconnect switches; from there, you can use SSH to the node management on node 4.
- C. You have not waited long enough for the failover timeout for a node management LIF; there is a broadcast domain configured for this situation.
- D. Connect to the node management on Node 3 and then use the HA interconnect to access node 4.
Answer: A
NEW QUESTION 53
You are planning the deployment of a new 8-node ONTAP 9.5 cluster. To prepare for the installation, you want to create a custom configuration worksheet with all the information that the customer provided. You also want to use the worksheet to generate CLI commands for your installation.
In this scenario, which NetApp tool will help you achieve your goal?
- A. Config Validator
- B. Fusion
- C. ConfigBulider
- D. Config Advisor
Answer: C
NEW QUESTION 54
A customer wants to expand their 10-node AFF A700s SAN cluster on Cisco Nexus 3132Q-V interconnect switches. The customer has six AFF A700s nodes available.
In this scenario, what should you do to expand the cluster?
- A. Add six nodes to the existing cluster.
- B. Add an expansion module to each switch and then add the six nodes.
- C. Add two nodes to the existing cluster without exceeding the SAN cluster limit.
- D. Replace the switches with Cisco Nexus 5596T switches and then add the six nodes.
Answer: C
NEW QUESTION 55
You have an AFF A400 cluster that is running ONTAP 9.7 software. You are asked to set up FlexCache for NFS volumes.
In this scenario, which statement is correct when implementing FlexCache?
- A. A site license is required.
- B. No license is required.
- C. A subscription license is required.
- D. A capacity license is required.
Answer: D
Explanation:
Explanation/Reference: https://www.netapp.com/pdf.html?item=/media/7336-tr4743.pdf (27)
NEW QUESTION 56
When planning the installation of a new ONTAP 9.5 cluster for a customer, which three steps should you perform? (Choose three.)
- A. Use Config Builder to create a configuration spreadsheet.
- B. Search for Technical Support bulletins for the hardware.
- C. Review the hardware components in Hardware Universe.
- D. Complete a Service Event Report.
- E. Open a support case to prepare for the installation.
Answer: A,C,D
NEW QUESTION 57
......
Focus on NS0-183 All-in-One Exam Guide For Quick Preparation: https://www.prep4sures.top/NS0-183-exam-dumps-torrent.html