Verified AD0-C102 Dumps Q&As - AD0-C102 Test Engine with Correct Answers
Pass Your AD0-C102 Dumps as PDF Updated on 2021 With 62 Questions
NEW QUESTION 23
You have winged all the voice over clips in a sequence on a single track.
How can you conveniently adjust the audio level for the sequence voice over clips?
- A. Select all the clips, and adjust the rubber band for any clip that has been selected.
- B. Select all the clips, right-dick any selected dip, and choose Audio > Set Level To.
- C. In the Audio Track Mixer, adjust the level for the track containing the voice over dips.
- D. In the Audio Clip Mixer, adjust the level for the track containing the voice over clips.
Answer: D
NEW QUESTION 24
You are color collecting some clips using the Vectorscope YUV in the Lumetri Scopes panel as a reference.
What is the function of this scope?
- A. It displays the RGB information on the dip using luminance values.
- B. It displays a horizontal chart with luminance information matching left and right of the clip.
- C. It displays the vector information of a non-raster dip. such as an Illustrator file.
- D. It displays a circular chart similar to a color wheel, that shows the videos chrominance information.
Answer: D
NEW QUESTION 25
You have an edit that is at its required final duration. but you need to use a clip that is 10 frames shorter than the spate m which you want to place it in the edit. Which tool helps solve this problem?
- A. Slip Tool
- B. Rate Stretch Tool
- C. Slide Tool
- D. Ripple Edit Tool
Answer: C
NEW QUESTION 26
You need to send an AAF of an Adobe Premiere Pro Sequence to a Pf oTools sound edilo' using embedded audio tiles with 48 dame handles. After selecting the Sequence and choosing File > Export > AAF. which settings should you choose in the AAF Export Settings dialog?
- A. Check Render Audio Clip Effects then select Embed Audio and under Render choose Trim Audio Files,
- B. Enable Breakout to Mono, then select Separate Audio and choose Trim Audio Files.
- C. Enable Breakout to Mono, then select Embed Audio and under Render choose Trim Audio Files.
- D. Check Render Audio Clip Effects, then select Embed Audio Files with Handles and choose Trim Audio Files.
Answer: C
NEW QUESTION 27
Your post-production in Adobe Premiere Pro is complete, and you are ready to perfect the audio mix in Adobe Audition.
With the sequence active In the Timeline panel how can you transfer the entire sequence from Premiere Pro to Audition to continue working?
- A. Choose Sequence > Convert > Export as > Audition.
- B. Choose File > Save As > Adobe Audition Session.
- C. Choose Edit > Edit in Adobe Audition > Sequence.
- D. Choose File > Project Manager > Save To Audition.
Answer: C
NEW QUESTION 28
You are -working on a sequence in Adobe Premiere Pro. You would like to create a new graphic in Adobe Photoshop to incorporate in the current sequence. How can you create a new Photoshop file with settings that match the current Premiere Pro sequence?
- A. With the sequence open in the Timeline panel choose File > New > Photoshop File.
- B. With the sequence in the Timeline panel, choose Graphics > New > Photoshop file.
- C. Select the sequence in the Project panel. Choose Photoshop File In the New Hem menu.
- D. In the Essential Graphics panel open the New Layer menu and choose Photoshop File.
Answer: B
NEW QUESTION 29
Your customer wants a video file with visible timecode. How can you do this using the Export Settings dialog box?
- A. Choose Captions > Timecode.
- B. Choose Set Start Timecode.
- C. Choose Effects > Timecode Overlay.
- D. Choose Add Timecode Bum-in,
Answer: A
NEW QUESTION 30
While working on a Premiere Pro project you want to changedefault 8in behavior so when you double click on a media Bin,it opens in a new window. How can you change default bin behavior on double-click?
- A. Open Project Settings and under the General tab. choose an option from the pull down menu under Bins.
- B. Open the Preferences panel and select the General tab. then choose an option from the Double-dick pull down menu under Bins.
- C. Open the Preferences panel and select the Media lab. then choose an option from the pull down menu under Bins.
- D. Open !he Preferences panel and select the Project tab, Ihen choose an optton from the Bin Behavior pull down menu under Projects.
Answer: B
NEW QUESTION 31
You want to configure a preset to adjust the timing of keyframes to fit the duration of the target clip. In the Save Preset dialog, which option should you select?
- A. Scale
- B. Duration
- C. Proportional
- D. Length
Answer: D
NEW QUESTION 32
You have a large amount of clips with similar names in a bin. You are searching for a particular visual event.
Out you're not sure which clip or when the event occurs.
Using default settings, how can you quickly preview the contents of the clips without opening them in the Source Monitor?
- A. Set the bin to Icon view. Move the cursor across clip thumbnails without selecting them. The clip contents will be displayed.
- B. Set the bin to Icon view. Select the clip you would line to preview. Move the cursor across the dip thumbnails to see the contents.
- C. Select all the clips in the bin and drag them into the Media Browser panel. Use playback controls to preview their contents.
- D. Set the bin to Icon view. Mold Command (macOS) / Ctrl (Windows) while moving the cursor across clip thumbnails.
Answer: C
NEW QUESTION 33
You have an image with low rectangular logos, but you only want to use oneof the logos in your timeline.
How can you achieve this?
- A. With the clip selected, click the Create 4-Point Polygon Mask button under Opacity in the Effect Controls panel and adjust the mask to fit the logo.
- B. Add the Ultra Key effect to the clip, go to the Effect Controls panel and use the eyedropper to select the areas you want to keep.
- C. Add the Auto Reframe effect to the clip, go to the Effect Controls panel and click the Set focus eyedropper. Then click on the logo you want to use and choose Analyze.
- D. Add the image Matte effect to the clip, go to the Effect Controls panel and adjust the numbers for Top.
Bottom Left and Right
Answer: D
NEW QUESTION 34
In a sequence, you have several clips with through-edits.
How can you configure Adobe Premiere Pro to highlight these edits?
- A. Click Timeline Display Settings and choose Show Through Edits.
- B. Select Edit > Preferences > Timeline and check Show Through Edits.
- C. Right-dick any instance of the clip and select Show Through Edits.
- D. Right-dick any edit point and select Show Through Edits.
Answer: A
NEW QUESTION 35
You do not have any graphic dips selected in the timeline, and you want to add a new text item. How do you do this?
- A. In the Graphics menu, choose New Layer > Text.
- B. In the Project panel choose New Item > Text.
- C. In the Essential Graphics panel click the plus icon (+) and choose Text.
- D. In the Essential Graphics panel menu, choose New Text Layer.
Answer: A
NEW QUESTION 36
What is a convenient way to toggle Show Guides on and off when creating titles?
- A. In the Timeline panel menu check Show Guides
- B. In the Essential Graphics panel, check Show Guides.
- C. In Window > Program Monitor, check Show Guides.
- D. Use the Button Editor to add the Show Guides button.
Answer: D
NEW QUESTION 37
You have created a text layer and want to save the style (font, color, shadow etc) for later use. How can you save the style as a Master Style?
- A. With the text layer selected, click the Graphics Properties button under Appearance, and choose Create Master Text Style.
- B. With the text layer selected choose Create Master Text Style from Master Styles menu in the Essential Graphics panel.
- C. With the text layer selected, choose Create Master Text Style in the Graphics menu.
- D. With the text layer selected, go to the Graphics menu and choose Master Styles > New Master Text Style.
Answer: A
NEW QUESTION 38
You have created a project that includes several elements you expect to use in future projects. What is the most efficient way to save time when creating similar projects?
- A. Note the media elements you found most useful and keep a record of any important effects and settings.
- B. Save a copy with (he media you expect to re-use in a single folder and use it as a template project
- C. Select the clips and sequences you want to include. Choose File > Save As > Template Project.;
- D. Save a full quality rendered output of every sequence so you can incorporate elements in future projects.
Answer: C
NEW QUESTION 39
You have a sequence m which you have tendered multiple effects, and you want to take advantage of smart rendering to speed up sequence export times. Which preview file format option is required?
- A. RED R3D
- B. H26A
- C. l-frame only MPEG
- D. Quicktime
Answer: A
NEW QUESTION 40
You have clips containing multiple matching camera angles stacked ina Sequence, but they are not correctly aligned. All clips contain matching reference audio, but the picture and sound are playing out of sync.
How can you realign these clips directly in the timeline?
- A. Select the group of clips that are out of alignment with one another in The Timeline, and from the Sequence tab drop down menu choose Multi-Camera Audio Follows Video.
- B. Choose Synchronize in the Timeline panel menu, then choose Audio as the Synchronize Point. From the Track Channel pull-down menu choose Channel 1 or Channel 2 and press ok.
- C. Select the group of clips that are out of alignment with one another in the Timeline, then go to the Sequence Menu and choose Synchronize. In the dialog box select Audio as the Synchronize Point and press ok.
- D. Select the group of clips that ate out of alignment with one another in the Timeline, right-E tick and choose Synchronize, in the dialog box choose Audio as the Synchronize Point and press ok.
Answer: D
NEW QUESTION 41
......
Pass Adobe AD0-C102 Exam Info and Free Practice Test: https://www.prep4sures.top/AD0-C102-exam-dumps-torrent.html