2022 Latest NS0-173 Exam Dumps Recently Updated 62 Questions
Network Appliance NS0-173 Real 2022 Braindumps Mock Exam Dumps
Network Appliance NS0-173 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 5 |
|
NEW QUESTION 32
A FlexPod administrator is building a WWN pool for a server that has 33 ports.
In this scenario, what is the smallest size possible for the pool?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 33
You are designing a FlexPod solution with a 2-node storage system, multiple compute chassis, and ACI.
In this scenario, which two network switches are required? (Choose two.)
- A. cluster interconnect switch
- B. leaf switch
- C. spine switch
- D. core switch
Answer: B,C
NEW QUESTION 34
A customer has several existing standalone Cisco UCS C-Series servers that they would like to repurpose and add to their FlexPod Datacenter solution.
Which action should the customer perform on these servers before using UCS Manager?
- A. Reboot the CIMC on each server.
- B. Remove the hard disks on each server.
- C. Zero-out the FlexFlash cards on each server.
- D. Reset the CIMC to the factory settings on each server.
Answer: D
Explanation:
On rare occasions, such as an issue with the current running firmware, troubleshooting a server may require you to reset the CIMC to the factory default. When this happens, all user-configurable settings are reset. This procedure is not part of the normal server maintenance. After you reset the CIMC, you are logged off and must log in again. You may also lose connectivity and may need to reconfigure the network settings.
NEW QUESTION 35
Which Cisco Nexus series switch supports NX-OS standalone mode or Application Centric Infrastructure (ACI) fabric mode?
- A. Nexus 9000
- B. Nexus 3000
- C. Nexus 7000
- D. Nexus 5000
Answer: A
NEW QUESTION 36
A customer is evaluating management tools for a new FlexPod infrastructure. They desire a tool that can orchestrate the provisioning of UCS compute nodes, NetApp storage, and VMware networking.
Which tool satisfies the requirements of this customer's heterogeneous environment?
- A. NetApp OnCommand Insight
- B. UCS Central
- C. UCS Director
- D. NetApp OnCommand Unified Manager
Answer: C
NEW QUESTION 37
An architect is designing a FlexPod environment with Cisco Nexus 5000 switches to SAN boot all of the ESXi hosts over FC.
In this scenario, what should the LUN ID number be?
- A. LUN 3
- B. LUN 0
- C. LUN 1
Section: (none)
Explanation - D. LUN 2
Answer: B
NEW QUESTION 38
A customer is planning to use a pair of MDS switches in a FlexPod design to host a few SAN workloads.
In this scenario, which two features should be enabled on the MDS switches for a successful configuration? (Choose two.)
- A. fport-channel-trunk
- B. NPV
- C. port-channel-trunk
- D. NPIV
Answer: C,D
NEW QUESTION 39
A customer is planning to deploy a FlexPod solution for a large scale SAN requirement that uses the FC protocol. The customer plans to use Smart Zoning in the configurations to reduce the number of TCAM entries in the zoning process.
In this scenario, which design would enable the customer to use Smart Zoning?
- A. storage connected to Cisco MDS switches
- B. storage connected to Cisco Nexus 5000 Series switches
- C. storage directly connected to Cisco UCS Fabric Interconnects
- D. storage connected to Cisco Nexus 9000 Series switches
Answer: A
NEW QUESTION 40
A customer has a FlexPod Express configuration with a FAS2720 system. The company has opened a new remote location and will purchase a FlexPod Express configuration with a FAS2750 system. The business requires that the data be replicated to the new location.
Which two software applications accomplish this task? (Choose two.)
- A. SnapRestore
- B. SnapMirror
- C. SnapVault
- D. FlexCache
Answer: B,D
Explanation:
FlexClone®: Instant virtual copies with file and volume granularity
SnapMirror®: Integrated data replication technology for simple, efficient, flexible disaster recovery and backup use cases
NEW QUESTION 41
A customer is configuring the UCS to handle a multitenant environment. The customer has created an organization within UCS for each tenant and would like to allow access to these organizations for only users that belong to that tenant.
In this scenario, which feature in UCS Manager should the customer use to accomplish this task?
- A. Trusted Platform Module
- B. User Roles
- C. Locales
- D. Service Profile
Answer: D
NEW QUESTION 42
You want to deploy a FlexPod Datacenter solution based on the minimum hardware requirements.
Which three components must be deployed in highly available pairs to accomplish this task? (Choose three.)
- A. Cisco UCS 5108 Chassis
- B. NetApp FAS Storage Controllers
- C. Cisco APICs
- D. Cisco USC Nexus Switches
- E. Cisco UCS Fabric Interconnects
Answer: A,B,E
NEW QUESTION 43
You are a data center architect at a service provider. You need to configure a new multi-tenant FlexPod service offering.
Which three UCS Manager features will you need to accomplish this task? (Choose three.)
- A. service profiles
- B. virtualization support
- C. auto discovery
- D. role-based access control
- E. policies
Answer: A,D,E
NEW QUESTION 44
You are configuring high availability within the network layer of your FlexPod configuration.
In this scenario, what are two Cisco best practices for designing vPC on your Cisco 9000 Series switches?
(Choose two.)
- A. Port channels should be configured for LACP passive mode.
- B. The vPC auto-recovery feature should be enabled.
- C. A minimum of four 10GB Ethernet connections are required for vPC.
- D. Peer keep-alive connectivity between the switches should be established.
Answer: C,D
Explanation:
vPC also relies on the periodic keepalive messages to determine when one of the connected devices on the peer link fails.
vPC peer link - The link used to synchronize states between the vPC peer devices. Both ends must be on 10- Gigabit Ethernet or 40-Gigabit Ethernet interfaces.
Reference:
configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide/ b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide_chapter_0111.html
NEW QUESTION 45
A customer has deployed a FlexPod Datacenter with Red Hat Enterprise Linux OpenStack Platform. The Cinder storage volumes that are attached to the Nova instances are not available.
Based on the terms of the cooperative support model, which three companies would the customer use to open a support case? (Choose three.)
- A. Red Hat
- B. NetApp
- C. Microsoft
- D. Cisco
- E. VMware
Answer: A,B,D
NEW QUESTION 46
Which two NetApp storage controllers would be used in a valid FlexPod Datacenter configuration? (Choose two.)
- A. NetApp E2800
- B. NetApp AFF A700
- C. NetApp FAS2700
- D. NetApp EF570
Answer: B,C
NEW QUESTION 47
A customer is designing a FlexPod Datacenter with Cisco UCS C-Series servers. They intend to manage the solution with Cisco UCS Manager. They want to cable the servers to the Cisco UCS Fabric Interconnects.
In this scenario, which three configurations are supported? (Choose three.)
- A. Multipath mode
- B. DualWire Management mode
- C. Cluster mode
- D. SingleConnect mode
- E. Direct Connect mode
Answer: B,D,E
Explanation:
Dual-wire Management (Shared LOM): Shared LAN on Motherboard (LOM) ports on the rack server are used exclusively for carrying management traffic. A separate cable connected to one of the ports on the PCIe card carries the data traffic. Using two separate cables for managing data traffic and management traffic is also referred to as dual-wire management.
SingleConnect (Sideband): Using Network Controller Sideband Interface (NC-SI), the Cisco VIC card connects one cable that can carry both data traffic and management traffic. This feature is referred to as SingleConnect.
Direct Connect Mode: Cisco UCS Manager supports an option to connect the Cisco UCS C-Series Rack- Mount Server directly to the FIs. This option enables Cisco UCS Manager to manage the Cisco UCS C- Series Rack-Mount Servers using a single cable for both management traffic and data traffic. The Cisco UCS VIC connects to the FI of the system. This connection uses a single connection from each VIC to each FI.
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm4-0/b_C-Series- Integration_UCSM4-0/b_C-Series-Integration_UCSM4-0_chapter_01.html
NEW QUESTION 48
......
Verified NS0-173 Exam Dumps Q&As - Provide NS0-173 with Correct Answers: https://www.prep4sures.top/NS0-173-exam-dumps-torrent.html